FS: TMICs, Headers, Uppipe, BOV, MBC, Stoptechs, Group N for 5MT + much more...
 

New and Improved... Pictures added and some more stuff...

Cobb StreetTuner for the 02-03 WRX $400 version includes free upgrade to StreetTuner advanced which should be out any day now. If you have this car and aV1 AP, you need this... Why pay $195 for the basic addition. $195

PWR Top Mount Intercooler for WRX. Near new cond. $900 new. $350

eBay HUGE Top Mount Intercooler. I'd be using this, but it hits the AC hard lines in the 04 STI. Should fit WRXs and I think newer STIs with different AC lines. New In Box $125

Vishnu silicone Y pipe with aluminum IC fittings. $50

TurboXS Standard Boost controller MBC New In Box. $40

Forge Atmosphere BOV WRX/STI. $100

Generic in fender CAI w/cone filter... $25

2 sets Speed Bleeders 10mm x1.0 $8 ea.

Gorilla top quality open end acorn racing lug nuts. 12 x 1.25. 19mm head. New. 3 Sets of 20: $10 ea. set.

Prothane urethane 20mm rear sway bar bushings. New: $15

__________________________________________________ __

SSAutochrome Stone Mountain headers with matching Up-Pipe. New In Box. These were going to go on my WRX, but at least one flange is warped according to S-Squared back in the day. Should be fixable. $300 new $100 Traded

Stoptech Big Brake Kit 328mm X 28mm fits under most 17" rims. Includes stainless lines, speed bleeders, and brand new rotors and many pads. Great track and autocross brake setup as well as the street. $1000 Sold

2 sets Schroth harness adjusting grips. These make your Schroths a breeze to tighten. $8 ea. SOLD: Ban_SUVs

2 Generic eBay grounding kits. $10 ea. SOLD

S-Squared flex up-pipe. This has a solid pipe floating inside solid steel flex (not braided). Nice design. $50 SOLD

Group N Transmission Mount for 5MT. $50 SOLD

12mm X 1.50 Gorilla wheel locks W/ Key. $5 SOLD

SSAutochrome WRX short throw shifter with new linkage arm. 2 throw positions + 2 lengths(ME Racing - GT2, Twin Stage Hi Performance Change Gear System). $25 SOLD

What does "TTIWWOP" mean...

I'll grab the grounding kits when I'm up, if that's cool. Are you going to be out at the track tomorrow?

What about those Stopteks everyone wants????;)

They are there... Stoptech BBK$1000

Dean, do you know which short shifter it is? I might be interested if it's not the same generic one I have already.

I'll be there...

It is a SSAutochrome ME Racing - GT2, Twin Stage Hi Performance Change Gear System.

Cool, I've got $20 on it.....or something. Mind bringing them out?

I've never heard of it, but I'll take it. Can't be worse than the one I have.

In the pile to go to the track.

I'll take the wheel locks too Dean, is it a set of 4? Those should fit my wife's Mazda. What would be the best way to obtain these items from you?

I'll take that up-pipe!

Dibs on the Schroth thingies, since Dean complained about me not having them. :p

Dean got any dressers?

Why, yes, in fact I do... Those were going in a different thread when I got around to it. Figured somebody would want pictures. Those are from free to dinner @ Joe Bob's, you determine the value.

Done. I'll be out and about in a bit and drop them off? PM or call me if that doesn't work.

Done.

Dibs in place. PM me to figure out how to get it to you.

Yeah I got an inside tip. :P I'll have to come by or see the pictures. Although I'm not picky.

That would be great! I'll be here till at least 4:30, if that's too early let me know and I can get them after work from you. Thanks Dean.

dean do you happen to have any sholder pads for a scroth harness?

Nope... eBay or WalMart if you don't want to pay Schroth prices. I have 2 Subaru logo'd ones I got on eBay, but not parting with those right now.

If you dont part with that header by the time I make it back mid-August I'll take that off your hands.

The silicone I/C pipes are Vishnu branded... or re-branded as it may be... I'm not sure who made them for Vishnu back in the day.

Also, bump for lots of good bits. That PWR intercooler was on my car temporarily during one of the interim builds. It's a really nice, beefy top-mount. Should make a decent upgrade for anyone running a bigger turbo on a WRX that doesn't want the lag of a FMIC.

Is the GrN 5MT Mount new or used?

Used but in very good shape. I think it was one of the last bits I put on though, so 10-15K miles at most. Probably closer to 5-10K. Would have put it on the STI, but the 6MT requires a different one that is shorter.

Anyone in Sac that needs stuff, arrange with Dean to have him bring it tomorrow and I'll bring it back down.

I'll take it, PM me your PayPal address, and Aaron said he'll pick it up from you :)

k-dogg39 PMed me about it and is coming by to check it out in bit. It is yours if he doesn't take it.

Bump for pictures and more stuff!!! I hate that you can't reorder attachments... The interior of the PWR intercooler is near the bottom.

Sorry I didn't call you Dean. I won't lie, just plain forgot.

Bump because you know you need this stuff... :)

Bump: Somebody needs these top mounts!!!

I want one but im completely broke.

dibs on boost controller

nevermind

Hey Dean, I just noticed the listing for the lug nuts. 12x1.25 @ 60deg is the proper fitment for Subaru's w/ aftermarket wheels, right? Why do you have 3 new boxes of 'em for sale?

I could use a set or two of some non-spline lugs.

Yes.

I bought a box of 100 figuring I could sell sets to people in addition to keeping a set or 2 myself. I am totally happy with them as these things are bullet and impact wrench proof as well as being light and easy to verify proper thread depth during inspections. Best lug nuts I have ever used.

Cool, sign me up for two sets of 'em. I'll give ya $20 the next time I can make it to a meet.

Sold