Subaru Enthusiasts Car Club of the Sierras

Subaru Enthusiasts Car Club of the Sierras (https://www.seccs.org/forums/index.php)
-   General Subaru Discussion & Club Chat (https://www.seccs.org/forums/forumdisplay.php?f=9)
-   -   NEWEST EVO dyno numbers. (https://www.seccs.org/forums/showthread.php?t=2099)

Evo Mike 2004-09-26 12:59 PM

NEWEST EVO dyno numbers.
 
Hey guys, i just went down to Gruppe-S this weekend to get some parts installed and some dyno time.

Newest mods:
Hks Cams (264/272)
Hks Cam Gears
Head Studs
Head Gasket
Upgraded Fuel Pump
Perrin Fuel Rail

These numbers are on a Mustang Dyno, that from what i hear, reads equally as hard as s2. There is about 20-30 more hp to be gained and 20 more torq. The ECU was cutting fuel because it thought the injectors were going to max out (which they weren't) so it was only allowing me to run 19.5psi. With the new head studs and head gasket i should be able to run closer to 22.5 psi (and if i'm correct 1 psi = 10 whp on the dyno) also some other stuff could be messed with to get more power once i get new injectors (which probably wont be for a while) like the sprockets, fuel, boost, timing, AFR, etc. So i'm not all too disappointed with the number. but check out the torque! It feels great for autox! :lol:

see you all thursday!
http://i.xanga.com/mike9little9/t/Ev...o%20number.jpg

enjoy

U53D 2004-09-26 01:13 PM

very nice :D

Libila 2004-09-26 01:29 PM

Very nice!

Kevin M 2004-09-26 01:34 PM

What timing are the cam gears set at? Vishnu spent hours and hours and hours testing cam gear timing (I helped to do some of the wrenching; Super hot 4G63s suck to mess with :P) and they settled on 5 degrees retard on both sides for best power gains.

Dean 2004-09-26 02:09 PM

I updated the Dyno Thread... Did I get the mods right?

Name: Mike T.(Evo Mike)
Car: 2004 Evo VIII
Mods: Helix downpipe, helix cat delete, Borla catback exhaust, SBC ID III boost controler, HKS 264/272 Cams, HKS Cam Gears, UTEC, Fuel Pump, Perrin Fuel Rail, Head Studs, Head Gasket
Wheel HP: 259.1 @ 6500 RPM
Wheel Torque: 256.5 @ 4000 RPM
Dyno: Mustang @ Grouppe-S Tunning 09/25/04 11:56pm

MikeK 2004-09-26 04:32 PM

I would give my left nut for that torque curve! That will rock at autocross

JC 2004-09-26 04:39 PM

Quote:

Originally Posted by Dean
Dyno: Mustang @ Grouppe-S Tunning 09/25/04 11:56pm

It's Gruppe-S.

Nice numbers Mike. So is your car faster than Ryan's now?

tysonK 2004-09-26 04:46 PM

Quote:

Originally Posted by MikeK
I would give my left nut for that torque curve! That will rock at autocross

I bet Nate can get close for around $1,800 instead of a left nut!

Evo Mike 2004-09-26 05:14 PM

haha, i wouldn't be trading anything for my left nut! :D but yeah, i'd say the car is faster than ryans.. however, from what we can tell from "trial and error." there is no running away from that WRX! :( maybe after a little dyno time and injectors things will be different...

MikeK 2004-09-26 07:49 PM

Quote:

Originally Posted by tysonK
I bet Nate can get close for around $1,800 instead of a left nut!

Not when you factor in the shredded transmission :P

tysonK 2004-09-26 10:58 PM

Quote:

Originally Posted by MikeK
Quote:

Originally Posted by tysonK
I bet Nate can get close for around $1,800 instead of a left nut!

Not when you factor in the shredded transmission :P

I was about to change my signature:

I loved modding my WRX but eventually there is that last expensive but really cool mod, a STi!

doubleurx 2004-09-27 01:43 PM

Quote:

Originally Posted by tysonK
Quote:

Originally Posted by MikeK
Quote:

Originally Posted by tysonK
I bet Nate can get close for around $1,800 instead of a left nut!

Not when you factor in the shredded transmission :P

I was about to change my signature:

I loved modding my WRX but eventually there is that last expensive but really cool mod, a STi!

Hey now, who are you talking about!

Kevin M 2004-09-27 07:36 PM

Quote:

Originally Posted by doubleurx
Quote:

Originally Posted by tysonK
Quote:

Originally Posted by MikeK
Quote:

Originally Posted by tysonK
I bet Nate can get close for around $1,800 instead of a left nut!

Not when you factor in the shredded transmission :P

I was about to change my signature:

I loved modding my WRX but eventually there is that last expensive but really cool mod, a STi!

Hey now, who are you talking about!

Almost every STi owner we know. :lol:


All times are GMT -8. The time now is 12:22 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
All Content Copyright Subaru Enthusiasts Car Club of the Sierras unless otherwise noted.