WTF? P0301, P0303, ???? just cruising?
 

No problems drive to/from or at the track yesterday, though only 6-8 laps, 2000+ miles on rebuild I think and 5 miles into my drive home from the Lunch Meat in 6th gear, and cruise control shuts off and the wonderful CEL with flashing cruise... WTF?

Scan before shutting off with AP and it was a P0301, P0303 and a ???? I don't recall ever seeing a ???? code. Maybe that is just the end of the list?

Misfires - makes sense in 6th if it's under load at lower RPM and you get a touch of bad gas or something.

As for the ????, got me.

The AP has trouble reading all codes. I threw an NPS code and the AP v.1 spit out HEX. COBB had to look it up. Check it again with a standard reader.

So, I found Learning View which works with my V1 AP cable by the way.

???? = P0000 PASS CODE (Missfire Detected)

What is more interesting is the knock correction table!!!

Ouch!

that code is used in romraider for a force ready monitors for smog, usually what it means is that there was a misfire in more then just the 2. the knock at low load isn't bad, if you have a built motor which I believe you do.

What injectors are these Dean?

Cory

Stock injectors. Wlabro pump, stock '07 VF43 turbo.

Thoughts on those big red -2.8s in the table?

they can be from the misfires, what tune is it running, Just a cobb OTS map?
also can be a transition point in the map where timing might be a little to high.
really could also be something making noise like a DP hitting or something like that.

Cory

OTS cobb stage 2 right now. Enough miles on it now I could go back to my custom tune I guess.

I do really like that table in "Learning View". Don't think I can see that table in StreetTunner.