Subaru Enthusiasts Car Club of the Sierras

Subaru Enthusiasts Car Club of the Sierras (https://www.seccs.org/forums/index.php)
-   User Classifieds (https://www.seccs.org/forums/forumdisplay.php?f=13)
-   -   Rory's list of WTB (https://www.seccs.org/forums/showthread.php?t=9417)

rory_a 2011-06-11 07:32 AM

Rory's list of WTB
 
Bump from the dead. Need some things to finish off the build, in a hurry. So, currently looking for:


- '05+ STi steering wheel, or '06-07 WRX driver's airbag if it'll fit the '04 STi wheel (anyone know?).

- Peanut WRX front grill.

- '08+ STI grill and trunk badges.

- Cusco (rep ok) peanut front lip, PSM.

- WRX side skirts, PSM.

- Other stuff that I didn't know I needed to make my car better


I think that's about it for now. Will update as more is needed/acquired.


Thanks all!

rayman 2011-06-12 01:49 PM

parts
 
Rory, I have the fsb bushings that I forgot to give you when you picked up your stuff RC

WRX06TR 2011-06-12 06:10 PM

I have a 27mm Whiteline rear sway.

rory_a 2011-06-12 06:43 PM

Sweet! Let's figure something out to pick em up!

rory_a 2011-06-12 06:43 PM

Quote:

Originally Posted by WRX06TR (Post 156951)
I have a 27mm Whiteline rear sway.

I'm pretty sure that'd be overkill for my 25mm hollow front :(

cody 2011-06-12 06:48 PM

Quote:

Originally Posted by rory_a (Post 156953)
I'm pretty sure that'd be overkill for my 25mm hollow front :(

Might not be. Rotation is good for autocross and this would help compensate if you had excessive rear camber for wheel fitment or something (been there). Just a thought. If you drive the car during the Winter, maybe remove the RSB.

WRX06TR 2011-06-12 06:59 PM

Well if you want, I have a 32mm hollow front too lol

rory_a 2011-06-12 07:28 PM

Quote:

Originally Posted by WRX06TR (Post 156955)
Well if you want, I have a 32mm hollow front too lol

Holy jeebus. Hadnt heard there was a 32mm lol

I'm tryig to keep it mellow as it's a daily still. Thinking 25 all around is tops for me.

rory_a 2011-06-12 07:31 PM

Quote:

Originally Posted by cody (Post 156954)
Might not be. Rotation is good for autocross and this would help compensate if you had excessive rear camber for wheel fitment or something (been there). Just a thought. If you drive the car during the Winter, maybe remove the RSB.

More concerned about road manners, hence keepin it simple, and small. Not going big on wheels/tires, at least not for a while. And don't want crazy camber, again the whole mellow thing. Need to be able to drive it on the crap roads out here, and keep her happy

WRX06TR 2011-06-12 07:39 PM

No worries, they have been laying in my garage for a while, so if you change your mind I'm sure they will still be here.

k-dogg39 2011-06-12 09:46 PM

Quote:

Originally Posted by rory_a (Post 156953)
I'm pretty sure that'd be overkill for my 25mm hollow front :(

That's what I have, 25 front, 27 rear. :D

cody 2011-06-12 09:51 PM

Quote:

Originally Posted by k-dogg39 (Post 156960)
That's what I have, 25 front, 27 rear. :D

And wagons tend to oversteer more than sedans, everything else being equal.

ScottyS 2011-06-12 10:17 PM

Quote:

Originally Posted by cody (Post 156961)
And wagons tend to oversteer more than sedans, everything else being equal.

One more reason to like 'em!

rory_a 2011-06-13 08:56 AM

Quote:

Originally Posted by k-dogg39 (Post 156960)
That's what I have, 25 front, 27 rear. :D

I have a 25mm hollow front, so roughly 22mm solid, 25mm rear would be a softer version of your setup., and what I'm going for. The Cobb/Hotchkis setup seems dialed, for a mellow pairing.

WRX06TR 2011-06-13 11:08 AM

Also keep in mind that the only time you will really notice sways when driving on the street is when you are going down a driveway or slant that will cause the car to pick up one wheel.

k-dogg39 2011-06-13 11:27 AM

Quote:

Originally Posted by rory_a (Post 156968)
I have a 25mm hollow front, so roughly 22mm solid

So do I! :cool:

ryan4601 2011-06-13 12:02 PM

I have a set of 06-07 door cards. They are from a TR I think as they are grey and black. They are the door cards only. I also have an all black rear seat (with pass through) from a 2004 wrx. Not sure if these are what you are looking for, but they are what I have! Thanks
Ryan

rory_a 2011-06-13 12:14 PM

The 06-07 door cards I'm looking for are the "Limited" black leather.

But whacha want for the back seats?

ryan4601 2011-06-13 02:24 PM

Gotcha, that's what I figured but thought I should ask anyway.

Seems like about $150 is the rear seat going rate on NASIOC, so how about $100? Let me know
Ryan

rory_a 2011-06-24 03:46 PM

Ryan, might wantto take you up on that seat if you're still interested in gettin rid of it, have a set of all black fronts on the way.

rory_a 2011-06-24 03:47 PM

Quote:

Originally Posted by WRX06TR (Post 156951)
I have a 27mm Whiteline rear sway.

Let me know if you still hav this/don't want it. And how much :)

cody 2011-06-24 03:54 PM

'atta boy. ;)

WRX06TR 2011-06-24 04:44 PM

Quote:

Originally Posted by rory_a (Post 157059)
Let me know if you still hav this/don't want it. And how much :)

I sure do! Retail is $263.94...so how about $180?

rory_a 2011-06-24 08:54 PM

Quote:

Originally Posted by WRX06TR (Post 157063)
I sure do! Retail is $263.94...so how about $180?

Sway and bushings only? How many miles on it?




Looks like I'm gonna need a set of rear stout mounts or similar and a set of rear endlinks :)

rory_a 2011-06-24 08:55 PM

Quote:

Originally Posted by cody (Post 157060)
'atta boy. ;)

:)


All times are GMT -8. The time now is 11:51 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
All Content Copyright Subaru Enthusiasts Car Club of the Sierras unless otherwise noted.