Subaru Enthusiasts Car Club of the Sierras

Subaru Enthusiasts Car Club of the Sierras (https://www.seccs.org/forums/index.php)
-   Technical Chat (https://www.seccs.org/forums/forumdisplay.php?f=11)
-   -   Another retarded move on my part (https://www.seccs.org/forums/showthread.php?t=11)

ArthurS 2002-12-08 09:40 PM

Another retarded move on my part
 
Well, as of 3 am last night, i put 2-inch crack into my bumper. I hit one of those think trees at Albertsons on Keystone. I was driving around the parking lot, looked up and saw I was heading for the tree. SO I braked hard, everything locked up, even the wheel, and compltly ran over the tree. There was hardly any damage to the tree or my car, but it left a crack in the bumper.

If any of you have a stock bumber or know were to get one, let me know. Its so small that I am not even going to get insurance involved. I probably wont even replace the bumper for a long time, but I am going to look into it now.

I wasn't trying to do anything stupid either, like showing off, just bad timing of looking away from the wheel.

Thanks everyone.

sperry 2002-12-09 02:00 AM

That sucks man... sounds like my LR fender dent... g'dam car wash dented my fender! Now I gotta figure out if I wanna get my dent extract on.

Hey, a cracked bumper's usually Orcari time! Get a replica WRC bumper!
http://www.drmotorsport.co.uk/MY01-front_grille_2.jpg

ArthurS 2002-12-09 08:13 AM

Ill look into that bumper, but can I still have the fog lights in with it? probably if i took those covers off.

ArthurS 2002-12-09 09:16 AM

do you have any links for replica wrc bumpers, I can't find many online.

sperry 2002-12-09 10:09 AM

Do a search for Oricari on www.NASIOC.com, I think www.cc-b.com is Oricari's website.

Also, I think Gilken makes a full bumper replacement that's virtually identicle to the real WRC car (since they make the one that's *on* the WRC car!).

ArthurS 2002-12-09 10:41 AM

thanks for your help, some of those bumpers are kinda pricy, so i am going to go down to Subaru and get a estimate, which I am sure is just as expensive. Either way, I guess ill have to put off the torque converter or any mods for a little longer.

sperry 2002-12-09 10:53 AM

Don't bother with a quote for the repair... check out SubiGal's www.allsubaru.com, or better yet email her directly: subie_gal@hotmail.com and ask about getting a NASIOC price on a new OEM bumper. I bet she can get you a one, shipped, for like 20% cheaper than any place in Reno.

Bumper installation's a breeze... all you need are basic tools. I've had mine off... it's like a couple of screws, and a handfull of those black plastic rivet-like things. I'd be happy to help install it, 20 minutes, tops!

ArthurS 2002-12-09 11:59 AM

Well I emailed her. I took a look at the bumper, it does seem pretty easy, but I could use the help. Once I get it in, ill talk to you. Ill get your beer or something in return.

sperry 2002-12-09 12:01 PM

Quote:

Originally Posted by ArthurS
Ill get your beer or something in return.

<homer>mmmm... payment beer...</homer>

ArthurS 2002-12-10 12:23 PM

Well, just for the hell of it, I got the quote from Subaru on the little damage done to my bumper....776.47$.

358.85$ for Parts
391.60$ for Labor.

That is so much money for a little a$$ crack in my front bumper. I can get the bumper from subiegal for pretty cheap, and install it.....but to get it painted, I would have to take it to subaru anyway right?

This all makes my head hurt.

sperry 2002-12-10 12:28 PM

Ask Jamie (Subie Gal) about getting a pre-painted one. I think they have them for the popular colors... at least they do for the body kit parts.

Even if you can't get them pre-painted, dropping off a bumper at a body shop for paint is a lot cheaper than having them do the install.

Worst case tho, is paying the dealer for it. For 2 reasons: the dealer's super expensive, and the service department's full of assholes (at least that's been my experience with Reno/Lithia Subaru).

ArthurS 2002-12-10 01:52 PM

Well, If I get the bumper from SubieGal, its not painted, but it would be easier to install, even with your help, and cheaper...But Lithia has a new bod shop that I would probably take it too for the painting, they seemed pretty cool.

But that way seems much cheaper. Not all that extra money in labor.

MattR 2002-12-10 04:47 PM

Changing out the bumper cannot be very difficult. That Ociari bumper is awesome looking.

ArthurS 2002-12-10 04:56 PM

I have been looking around for where to buy one of those, can't find any link over NASIOC either. SubieGal doesn't offer them yet, but yes they do look cool.

Lithia's newbody shop said they would still charge me $350.00 to paint the bumper even if I purchase it and install it myself. But then again, I would be nervous having any one else in town paint it, since its that odd Midnight Black Pearl color.

I don't know exactly what to do yet.

sperry 2002-12-10 04:56 PM

Quote:

Originally Posted by MattR
Changing out the bumper cannot be very difficult. That Ociari bumper is awesome looking.

I thought it was a bumper too, but it looks like it's just an underspoiler, fog covers, and a little intake thingy for the side vents.

sperry 2002-12-10 05:00 PM

Quote:

Originally Posted by ArthurS
I have been looking around for where to buy one of those, can't find any link over NASIOC either. SubieGal doesn't offer them yet, but yes they do look cool.

Lithia's newbody shop said they would still charge me $350.00 to paint the bumper even if I purchase it and install it myself. But then again, I would be nervous having any one else in town paint it, since its that odd Midnight Black Pearl color.

I don't know exactly what to do yet.

That sounds a little high. I wouldn't worry too much about having a body shop other than the dealer paint it. I had my WRB car painted at Shaber Ave Autobody (talk to Bruce, 775-302-1261) and the paint match is *perfect*. I can't imagine he'd charge more than about $200, since there's minimal prep work.

Oh, and regarding the Oricari stuff, these guys are the US distributers: http://www.cc-b.com/Main1.htm

I think all the parts for that kit are fiberglass, but they're supposed to be very high quality.

ArthurS 2002-12-10 05:09 PM

Yea, ill have to talk to him....see what he can do...

That would be much easier. Get the bumper from SubieGal for aroun 140-150$ ish, and the paint doen for Under 200$, thats pretty good. I just have to go find one more tiny plastic piece that cracked that can't be more then 5$.

ArthurS 2002-12-10 07:14 PM

Well, I brought the situation that I am in to my parents, they are just going to give me money for christmans to get it repaired however which way I want. Kinda crappy christmas gift, since its just to repair a small crack on my bumper, but oh well.

I am still wondering why the brakes and wheel locked up. I was only going about 30 mph, and slammed the brakes when I saw the tree, and it all froze. I though anti-lock pumped it for you so things like that wouldn't happen.

MattR 2002-12-10 08:34 PM

Depending on where the damage is, I have a spare lower front lip, like the one on my wagon, I'd sell it to you if you could hide damage with it. It just goes over teh existing bumper. heres a pic http://photos.imageevent.com/mroynv/.../wrx%20008.jpg

ArthurS 2002-12-11 08:08 AM

That might work considering where the damage is.....on the 21st Ill show your the crack and you tell me if it will work.

MattR 2002-12-11 08:24 AM

Sounds good

sperry 2002-12-11 09:26 AM

Quote:

Originally Posted by ArthurS
I am still wondering why the brakes and wheel locked up. I was only going about 30 mph, and slammed the brakes when I saw the tree, and it all froze. I though anti-lock pumped it for you so things like that wouldn't happen.

The ABS on the WRX is a little notorious, at least on ice and gravel. However on tarmac, it usually works pretty well.

As they say in racing, "both feet in when you spin". You were sure to get the clutch in too right? Sometimes in an autocross, I'll get on the brakes real hard, but since I got big feet, I'll be mashing the gas too, so if the clutch is out, then I lose a ton of braking power since I'm still driving the wheels.

Most likely you were just "pushing" (aka understeering). The combination of braking and steering input was more force then the traction of the tires, and the front wheels skid. There's nothing ABS can do to help this, since ABS can only modulate the brakes, and not the steering. This happens all the time at an autocross, and it simply means you were going too fast for the radius of the turn you needed to avoid the tree. In fact the ABS might not have even come on since the tires were probably still spinning! If the tire's skidding laterally, it can still be turning and therefore the ABS systems thinks all is well.

The WRX has a ton of understeer from the factory. One reason is just for safety... since the opposite of understeer in oversteer (aka "loose"), and a car that oversteers spins-out easily. The other reason is that in general AWD cars oversteer since the drivetrain binds a bit when the inside and outside wheels spin at different speeds. Many people install a stiffer rear swaybar to help make the car more nutral. I put an adjustable Whiteline bar on mine, so I can loosen it up for autocrosses, but keep it easier to drive in the snow during the winter. A good set of properly adjusted springs/struts or coilovers will also tune out understeer.

Phew, that post got a little long!

ArthurS 2002-12-11 11:01 AM

I see what you are saying. Although, mine is a automatic, so no clutch has involved, but I do believe that the wheels may have been spinning still. There were no skid-marks left on the ground, although I was full on the brake. But by time I saw the tree, I didn't have much brake time in.

Maybe if I used my E-brake, that would have helped. It was all a little fast for me, and its going to cost me. I just have to be more careful until I fully understand how to control the car.

sperry 2002-12-11 11:07 AM

Quote:

Originally Posted by ArthurS
Maybe if I used my E-brake, that would have helped.

E brake's a no-no. On the US WRX the E Brake is basically only good for parking the car. There's 2 issues with it, 1: it'll just lock the rear tires, and a sliding tire is BAD, especially on the rear of the car (spin city), and 2: the center differential will get screwed up if the rears are locked and the front's are spinning (same reason you have to tow a WRX on a flatbed).

Overseas, the STi has a special center diff that allows it to disengage when the e-brake's pulled. That way you can use it for slide control off-road, but don't do it on the US cars!

MattR 2002-12-11 11:12 AM

your ebrake probably would have skidded you even worse, its not made to stop the car, it just locks the rear up instantly :twisted: great for ebrake slide, but not for stopping. Doint do ebrake slides either though, they're not good. And, it would liekly have sent you into the tree sideways.

Are you on stock tires BTW? I had a similar experience with my stock tires, not so much becasue of traction problems, but because the sidewalls flex a lot, so when you turn and brake, you get a real un stable feeling. be careful


All times are GMT -8. The time now is 09:08 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
All Content Copyright Subaru Enthusiasts Car Club of the Sierras unless otherwise noted.