fly wheel and clutch cover
 

I hopefully won't need these, but just in case the fwd clutch i ordered is wrong (8.5" instad of 7.75") does anyone have an impreza awd flywheel / clutch cover, used but okay condition?

I probably do.

Dean I'm going to give you a call very shortly

Due to "Subie Gal" Jamie Thomas screwing up my entire order. (GOD FRICKEN DAMN IT)

I Really Really need to find a 8.5" clutch disc with 24 teeth 1" ID

if anyone has one please call/ text me ASAP 775-901-0992 i can pick it up @ lunch tomorrow or after work, Maybe after work tonight i may be in town for a little bit.

a flywheel (that will bolt to a 1.8L) and a clutch cover for the above disc I might also need.

if you have any of the above bits please text me. I'm over Visa-ed and the parts i ordered for savings, and are wrong totally F@#$*#ed me over. looking for a borrow or free/cheap used, but i'm screwed right now so i'll entertain offers.

thanks

Prescott in 4 days... assuming i have a car to race with. :(

clutch cover=pressure plate? If so I have an exedy Pressure plate for a RS you can have for dirt cheap.

Yes. I thought he wanted the sheet metal cover that keeps crap out of the bell housing. Yes, he wants a complete clutch package or pieces. Flywheel, clutch disc and pressure plate. Probably throwout bearing as well.

I've got the whole stock setup from the coupe out in the garage, except maybe a throwout bearing. You can have the whole thing for cheap if you can stop by and pick it up.

I have a throw out bearing, and 2 covers that fit a 7.75 disc (might fight about to a 8.25)
I have 2 discs with 21 teeth(wrong for my 95 tranny ) and 1 disc with 24 teeth (Awd version) but it doesn't quite fit in the clutch cover.

Sweet Keven sounds like exactly what i need :D


http://www.californiarallyseries.com..._standings.htm I only have a 1 point lead going into Prescott :eek:
(Near bottom Perf-Stock)

I think my extras are for the hydro SS tranny, but if you don't find what you are looking for I will paw through my parts and see.

thanks a bunch!

sounds like kevin has exactly what i need. an entire kit that will bolt to a 1.8L
and fit on a 24 teeth 1" transmission input shaft. (stock impreza L awd, RS, WRX size)
:)
I'll know around 9-ish tonight if i'm A-ok or panic ready... hehe

Yep parts fit great, Betsy is ready to roll!

Good deal, good luck!

Excellent.