Quote:
Originally Posted by Kavid
So I will get a new UP probably along with the EGT Probe just to be safe.
|
I wouldn't bother. Just wait until you get the AP and can flash to stage 2 and replace the stock UP with an aftermarket one. It's like a 5 hour job, but not too hard. In the mean time, stay out of boost. You don't need an EGT probe in an aftermarket UP but installing one in the headers for a gauge is a smart move.
I know you can run an aftermarket UP with stage 2 (and you must have a DP too). Check the map notes (on Cobb's site) for stage 1 too though. An UP may be allowable with stage 1 as well (no other mods).