Subaru Enthusiasts Car Club of the Sierras - View Single Post

fuente · 2009-01-15, 02:08 PM

I got a tune by Ed on Wednesday and got really great results. I have a 2006 WRX LImited and installed a VF39, STI TMIC, Cobb Turboback and was running the COBB OTS map for the VF39 and it was total crap. I took it to Ed and they installed a Walboro, Colder spark plugs, and a Hallman MBC. Ed and I drove off into completely desolate roads in Fairfield, CA and did about 10-15 pulls and after each one we would pull over and he would adjust the calibration a bit. The car is running about 19 PSI and it is super smooth all the way till 7000 RPMS.

I wanted a conservative tune, so Ed was gentle with it and I ended up with about 250 Horsepower and 271 Torques at-the-wheels. It feels like a completely different car. Awesome.

Ed's shop now does full installs and currently has about 8 STI's that they are doing engine builds on. I am going back in a month or so to have them install a RPS clutch, resurface the flywheel, and clean off my rotors. Ed is the best!

2009-01-15, 02:08 PM	#1
fuente n00b Join Date: Aug 2007 Location: Reno, NV Posts: 24 Car: 2006 WRX Limited MT VF39 Protuned, with Cold Air Box, Sway Bars, Walboro FP, Hallman MBC Do Work!	Excellent Tune by EQ Tuning I got a tune by Ed on Wednesday and got really great results. I have a 2006 WRX LImited and installed a VF39, STI TMIC, Cobb Turboback and was running the COBB OTS map for the VF39 and it was total crap. I took it to Ed and they installed a Walboro, Colder spark plugs, and a Hallman MBC. Ed and I drove off into completely desolate roads in Fairfield, CA and did about 10-15 pulls and after each one we would pull over and he would adjust the calibration a bit. The car is running about 19 PSI and it is super smooth all the way till 7000 RPMS. I wanted a conservative tune, so Ed was gentle with it and I ended up with about 250 Horsepower and 271 Torques at-the-wheels. It feels like a completely different car. Awesome. Ed's shop now does full installs and currently has about 8 STI's that they are doing engine builds on. I am going back in a month or so to have them install a RPS clutch, resurface the flywheel, and clean off my rotors. Ed is the best! Last edited by fuente; 2009-01-15 at 02:54 PM.