Subaru Enthusiasts Car Club of the Sierras - View Single Post

sperry · 2009-07-22, 01:17 PM

Dean, try better bolts:

I'm not saying you're better off with them in the upper location, just that they should be just as strong as OEM up there.

...and a lot of this confusion came from me reading "you can't use camber bolts at all in the fronts". I went back and re-read Cody's post, and I agree that it would be better to put the bolts in the lower holes and leave the top bolt alone. But that still doesn't change that I think a proper aftermarket bolt up top would be fine.

2009-07-22, 01:17 PM	#31
sperry The Doink Real Name: Scott Join Date: Nov 2002 Location: Portland, OR Posts: 20,335 Car: '09 OBXT, '02 WRX, '96 Miata Class: PDX/TT-6 The way out is through	Dean, try better bolts: I'm not saying you're better off with them in the upper location, just that they should be just as strong as OEM up there. ...and a lot of this confusion came from me reading "you can't use camber bolts at all in the fronts". I went back and re-read Cody's post, and I agree that it would be better to put the bolts in the lower holes and leave the top bolt alone. But that still doesn't change that I think a proper aftermarket bolt up top would be fine. __________________ Is you is, or is you ain't, my con-stit-u-ints? Last edited by sperry; 2009-07-22 at 01:20 PM.