Subaru Enthusiasts Car Club of the Sierras - View Single Post

Kevin M · 2011-04-25, 05:03 PM

If you bypass the hill holder dealie underneath the fuel filter on top of the framerail, you really only have a two port MC, but you may have to get replacement lines to re-plumb for the part you bypass. I forget exactly what I did on my wagon to bypass it but if you stop by this week we can look at it and maybe figure it out.

You may need to fab up your own brake line system at this point. If that's not legal, you're just going to have to find out if you can get a big enough non-ABS MC to push your new, ABS-intended RS brakes around. Or go back to the single piston sliders and upgrade your pads.

2011-04-25, 05:03 PM	#2
Kevin M EJ22T Join Date: Sep 2003 Location: Reno Posts: 9,445 Car: '93/'01 GF6, mostly red Class: 19 FP	If you bypass the hill holder dealie underneath the fuel filter on top of the framerail, you really only have a two port MC, but you may have to get replacement lines to re-plumb for the part you bypass. I forget exactly what I did on my wagon to bypass it but if you stop by this week we can look at it and maybe figure it out. You may need to fab up your own brake line system at this point. If that's not legal, you're just going to have to find out if you can get a big enough non-ABS MC to push your new, ABS-intended RS brakes around. Or go back to the single piston sliders and upgrade your pads. __________________ FWD is the new AWD Last edited by Kevin M; 2011-04-25 at 05:06 PM.