Subaru Enthusiasts Car Club of the Sierras - View Single Post - Oil pressure sensor adapter fitting needed

sperry · 2005-08-17, 04:53 PM

Unfortunately, everything Autometer is SAE, so it's usually a hassle getting it to work on metric cars.

Here's what I built out of a oil-cooler sandwich adapter:

Basically, I drilled a bypass into the oil-cooler adapter to convert it into an oil gallery, then installed the oil temp and oil pressure sensors in it. Dean is the current owner of this setup, and I believe it's still working just fine!

You can see more pictures and download my writeup on the installation here.

2005-08-17, 04:53 PM	#2
sperry The Doink Real Name: Scott Join Date: Nov 2002 Location: Portland, OR Posts: 20,335 Car: '09 OBXT, '02 WRX, '96 Miata Class: PDX/TT-6 The way out is through	Unfortunately, everything Autometer is SAE, so it's usually a hassle getting it to work on metric cars. Here's what I built out of a oil-cooler sandwich adapter: Basically, I drilled a bypass into the oil-cooler adapter to convert it into an oil gallery, then installed the oil temp and oil pressure sensors in it. Dean is the current owner of this setup, and I believe it's still working just fine! You can see more pictures and download my writeup on the installation here. __________________ Is you is, or is you ain't, my con-stit-u-ints?