Quote:
|
Originally Posted by cody
According to this read, the bar is under tension (not compression) during cornering (which makes sense if you think about the force on the outside wheel during cornering). So, if anything, you'd want to pre-tension it, not pre-compress it...just to answer my own question.
2ndly, there is no discernable play in the quick-release bolts. They are very snug.
The Whiteline bar is not designed so you can simply spin the bar to lengthen and shorten it. You have to uninstall it on one side and spin the end piece that the Q-R bolt slides through to change its length. Perhaps I'll try to shorten it half a turn. |
Interesting read. It's a bit counterintuitive that the strut towers spread apart under smooth cornering force, but I can believe that.
If the bar doesn't spin for adjustment, there's really no way to put a decent pre-tension on it. If you've got to be able to slide the bolt through it while it's a its final length, you're screwed. I guess just making sure that quick-release is nice and tight is the best you can do.