Quote:
|
Originally Posted by MikeK
Here is a pic I found from my WRX. The STi is exactly the same, so I assume the RS will be the same as well.
Rear attachment point:
The plastic cover on the rear shoulder harness pops off, and there is a bolt under there....
|
I do not suggest using this bolt... Most of us are now using the bolt on the rertactor behind the seat. You have to remove the seat to get to it, but a much better attachment point IMHO.
If the stock belt doesn't give you at least 8 full turns, use a longer bolt from the kit.
For the lap belts, you want both to go to the floor so you can slide the seat to tighten them easily.
Inside front attachment point:
Front seat inside rail rear bolt. under the rail. No seat removal required.
Outside front attachment point:
Same as Mike's post.