LIC Motorsports has worked long and hard to bring these to market but finally they have arrived. There is a slew of options to choose from in regards to what will work best for your application, be sure to review all options below.
Here is a quick breakdown of the options.
-5x114.3 to 5x100 applications (no geometry correction)
-5x114.3 to 5x100 applications (geometry corrected)
-5x114.3 (geometry corrected)
-5x114.3 bearings to 5x100 lug conversion
First Option
The LIC Motorsports 5x114.3 modified knuckles for 5x100 applications is designed for people looking to upgrade there front wheel bearings but aren't wanting to upgrade everything else (axles, transmission, struts, etc...) to STi.
These modified knuckle's have been filled, redrilled, and precision CNC machined to fit the 5x100 strut housings. In addition the knuckle has been trimmed where the brake calipers mount, that way more aftermarket brake applications will fit universally with it.
The knuckle's are sold in pairs and come bare (Please review the available configurations for the correct product for your needs).
Available in 5 Configurations
-Knuckles Only (kit includes: Left and Right Knuckles ONLY)
-Bearings + Bolts for 5x114.3 Lug Pattern (kit includes: Left/Right Knuckles, x2 Wheel Bearings, x8 Wheel Bearing Bolts)
-Bearings + Bolts for 5x100 Lug Pattern (kit includes: Left/Right Knuckles, x2 Wheel Bearings modified to accept 5x100 rotors/wheels, x8 Wheel Bearing Bolts)
Complete Package for 5x114.3 Lug Pattern (kit includes: Left/Right Knuckles, x2 Wheel Bearings, x8 Wheel Bearing Bolts, x4 Brake Caliper Bolts, x2 Axle Nuts, x1 set of LIC Motorsports ABS/Speedo Ring Spacers. Must put in comments section when checking out what size you need: either 8mm or 6mm)
-Complete Package for 5x100 Lug Pattern (kit includes: Left/Right Knuckles, x2 Wheel Bearings modified to accept 5x100 rotors/wheels, x8 Wheel Bearing Bolts, x4 Brake Caliper Bolts, x2 Axle Nuts, x1 set of LIC Motorsports ABS/Speedo Ring Spacers. Must put in comments section when checking out what size you need: either 8mm or 6mm)
Second Option
The LIC Motorsports modified and geometry corrected 5x114.3 knuckles for 5x100 applications is designed for people looking to upgrade their front wheel bearings, roll centers, and bump steer geometry from having a lowered vehicle but at the same time aren't wanting to upgrade everything else that goes with it (axles, transmission, struts, etc...) to STi.
The geometry corrected and modified knuckles have been filled, redrilled, and precision CNC machined to fit the 5x100 strut housings. In addition the knuckle has been trimmed where the brake calipers mount, that way more aftermarket brake applications will fit universally with it. The roll center/bump steer area has been corrected and will accommodate vehicles 1.5” lower from stock all the way down to 4” lower than stock and still maintain proper geometry throughout. *if wanted to rebump steer the car it can easily be done with adjustment of different spacers. Current configuration is what LIC Motorsports has found to work best*
Available in 5 Configurations
-Knuckles Only (kit includes: Left and Right Geometry Corrected Knuckles + Geometry Hardware)
-Bearings + Bolts for 5x114.3 Lug Pattern (kit includes: Left and Right Geometry Corrected Knuckles + Geometry Hardware, x2 Wheel Bearings, x8 Wheel Bearing Bolts)
-Bearings + Bolts for 5x100 Lug Pattern (kit includes: Left and Right Geometry Corrected Knuckles + Geometry Hardware, x2 Wheel Bearings modified to accept 5x100 rotors/wheels, x8 Wheel Bearing Bolts)
-Complete Package for 5x114.3 Lug Pattern (kit includes: Left and Right Geometry Corrected Knuckles + Geometry Hardware, x2 Wheel Bearings, x8 Wheel Bearing Bolts, x2 Axle Nuts, x1 set of LIC Motorsports ABS/Speedo Ring Spacers. Must put in comments section when checking out what size you need: either 8mm or 6mm)
-Complete Package for 5x100 Lug Pattern (kit includes: Left and Right Geometry Corrected Knuckles + Geometry Hardware, x2 Wheel Bearings modified to accept 5x100 rotors/wheels, x8 Wheel Bearing Bolts, x2 Axle Nuts, x1 set of LIC Motorsports ABS/Speedo Ring Spacers. Must put in comments section when checking out what size you need: either 8mm or 6mm)
Third Option
The LIC Motorsports modified and geometry corrected 5x114.3 knuckles is designed for people looking to upgrade their front roll centers/bump steer geometry from having a lowered vehicle.
The geometry corrected knuckles are precision CNC machined/modified to accommodate these often over looked but necessary changes. In addition the knuckle has been trimmed where the brake calipers mount, that way more aftermarket brake applications will fit universally with it. The roll center/bump steer area has been corrected and will accommodate vehicles 1.5” lower from stock all the way down to 4” lower than stock and still maintain proper geometry throughout. *if wanted to rebump steer the car it can easily be done with adjustment of different spacers. Current configuration is what LIC Motorsports has found to work best*
Available in 2 Configurations
- Knuckles Only (kit includes: Left and Right Geometry Corrected Knuckles + Geometry Hardware)
- Complete Package (kit includes:Left and Right Geometry Corrected Knuckles + Geometry Hardware, x2 Wheel Bearings, x8 Wheel Bearing Bolts, x2 Axle Nuts)
All these application specific knuckles can be found in our LIC Motorsports + Knuckles Catalog:
LIC Motorsports + Knuckles Catalog | Buy Online at LICmotorsports.com!
__________________________________________________ __________________________________________________ __________________________________________________ __________________________
Just released!
LIC Motorsports 5x114.3 to 5x100 Bearing/Hub Conversion*
LIC Motorsports has been working long and hard to bring these 5x114.3 to 5x100 conversion Bearings/Hubs to the marketplace. Ever since the release of the custom modified knuckles back in early 2011, the demand has been made and it is now available.
Commonly folks whom track their cars are trying to upgrade the bearings b/c the older style stuff just has too much failure under harsher conditions. These OEM 05+ STi bearing/hub assemblies have been machined down to fit the WRX and 04 STi. The lug pattern has been changed/drilled to 5x100 and outer OD has been trimmed to accommodate the smaller ID in those rotors. This is a perfect way to do things in stages and avoid the step of having to get rid of the current 5x100 wheels/rotors. These bearings still require the use of 05+ Knuckles (be sure to check out all the optoins LIC Motorsports has available in the "Knuckles Catalog", which cover's everyone's needs to be able to run these units).
Notes:
-Fitment: 02-07 WRX, 04-08 FXT, 04 STi
-Will require the use of LIC Motorsports 6mm or 8mm ABS/Speedo Ring Spacer
-ARP Extended Studs can be substitued
-Sold in pairs only (Quanity 2)
These can be found in our Bearings/Hubs Catalog:
LIC Motorsports + Bearings/Hubs Catalog | Buy Online at LICmotorsports.com!
-Noah