Quote:
Originally Posted by DaveWRX
Wet sand with about 1000 grit sand paper. Then hit it with a buffer with plasctic cleaner. This will make the lense look clear now to add a nice protective finish buffer it with plastic polish. The polish and cleaner I used were made by 3M and I found them to work best. 3M can be found at Napa
|
The plastic cleaner removes all the dirt and debris from the lens. The polish will make them clear . Polishes do the same thing as sand paper except on a very fine level compared to sand paper or a cutting compound. The polish is similar to using something like 3000 grit sandpaper.