This was over this last weekend. I traded in my '01 Cobra for a Obisdan Black Pearl 2006 Subaru WRX STI. Of course it came with dealer installed swirls, and some bad water spots. It also had a weird haze on the paint.
Process:
QEW
Clay w/Spray and Wipe
On areas with bad Water Spots/Swirls they got Optimum Compound via PC on a light cutting pad speed 6. It left some hazing.
Optimum Polish on a polishing pad speed 6, all around, and on areas that had hazing left over from OC.
FMJ x 2 (Planning on 1/2 more coats then 1-2 coats of Pink Wax)
Exhaust Tip got DACP
Tires - Black Onyx Tire Gell
Windows/Mirrors/Plastic - AIO
There are still some swirls left in the smaller areas, and they will come out once I get my smaller spot pads, mainly on the front and the sides of the roof.
There is a little bit of dust from taking pics last night, ill try and wash it today and get pics with no dust. The paint on this car is MUCH easier to work with, if it wasnt for the water spots, all it would have taken would be OP all around on a cutting pad. I still need to seal the rims and do the wheelwells, so ignore those
On to the pics [
Full Gallery]:
