GrimmSpeed Crank Pulley - Product Release - Subaru Enthusiasts Car Club of the Sierras

GrimmSpeed · 2011-05-11, 03:12 PM

http://www.grimmspeed.com/catalog/pr...roducts_id=230

Fits all Imprezas 93-11, Legacy 1994-2009, Forester 1998-2009

Decreases rotational mass more than 3.5lbs over OEM (You will see much faster revs as a result)

Optimum weight to avoid misfire CELs or hesitation

Balanced CNC machined 6061 T6 anodized Aluminum

Includes OEM timing marks for timing verification

2008+ OEM Subaru Stretch Belt Install Kit Option (No other company offers this Optional Add-On)

The OEM Subaru crank pulley has been a cause for concern ever since its original design. It is extremely heavy, susceptible to catastrophic failure, and quite unsightly. Continuing to use this on our cars just wouldn't do. Eliminating rotational mass while maintaining a safe presence can increase reliability and bring faster Rev's! For our Lightweight Crank Pulley we pulled out all of the stops. CNC machined from 6061 T6 Aluminum our pulley makes no compromise. It weighs in at 3.5lbs lighter than OEM while at the same time increasing its durability. Marked with a timing mark and perfect cut keyway makes this install a breeze. We designed the pulley with the optimum weight for performance while avoiding misfire CEL's and engine hesitation.

Here at GrimmSpeed innovation is our standard with every product we release and our pulley is no exception. We have designed the only aftermarket pulley installation and removal tool that works with each style of OEM Subaru pulley as well as our aftermarket lightweight pulley. To take it one step further we have also designed the only compatible aftermarket stretch belt installation kit for all 2008+ Subaru Models.

GrimmSpeed Crank Pulley Removal/Installation Tool(works with both OEM Pulleys as well)
http://www.grimmspeed.com/catalog/pr...roducts_id=231

http://www.grimmspeed.com/catalog/pr...roducts_id=230

Justin Grimm

UPDATE 5/12/2011 - Just finished the Installation Video

YouTube

100_Percent_Juice · 2011-05-12, 08:46 AM

Everyone can hate all they want, but there is no denying that you guys make some of the cleanest Subaru parts on the market.

GrimmSpeed · 2011-05-12, 08:49 AM

Quote:

Originally Posted by 100_Percent_Juice

Everyone can hate all they want, but there is no denying that you guys make some of the cleanest Subaru parts on the market.

Thanks! We truly take pride in putting in the effort to create something new and exciting. Creating some ugly product that is the same as everything else isnt nearly as fun

Justin Grimm

Dean · 2011-05-12, 08:55 AM

OK, what is the bracket for? 3 hex heads hold it on and it has what appears to be a 3/8" offset drive, but what the heck are the other 4+4 bolts & hexheads

GrimmSpeed · 2011-05-12, 08:59 AM

Quote:

Originally Posted by Dean

OK, what is the bracket for? 3 hex heads hold it on and it has what appears to be a 3/8" offset drive, but what the heck are the other 4+4 bolts & hexheads

The yellow-zinc bracket you see in the pic is our optional Crank Pulley Removal/Install Tool. In an effort to design a complete package, we made our tool so it works with both the 93-07 OEM Pulleys and 08+ OEM Pulleys as a removal tool as well.

Justin Grimm

Dean · 2011-05-12, 09:25 AM

Quote:

Originally Posted by GrimmSpeed

The yellow-zinc bracket you see in the pic is our optional Crank Pulley Removal/Install Tool. In an effort to design a complete package, we made our tool so it works with both the 93-07 OEM Pulleys and 08+ OEM Pulleys as a removal tool as well.

Justin Grimm

Ahhh, gotcha. Really more of a crank bolt removal/install tool? The pulley isn't a problem after the damn bolt is loose thus no center threaded bit to push on the crank. Is it a 3/8 or 1/2" square drive just out of curiosity?

Now if only there was something like that for the cam pulleys that wasn't an expensive piece of crap or required the use of an old timing belt and pairs of vice grips, but I digress.

GrimmSpeed · 2011-05-12, 09:31 AM

Just finished the Installation Video

YouTube

knucklesplitter · 2011-05-14, 04:01 PM

Cory/MPREZIV builds or rebuilds several Subaru engines per month. I'm curious why he has never needed a crank pulley installation tool.

Dean · 2011-05-14, 05:23 PM

Quote:

Originally Posted by knucklesplitter

Cory/MPREZIV builds or rebuilds several Subaru engines per month. I'm curious why he has never needed a crank pulley installation tool.

He has a BMF impact gun!

GrimmSpeed · 2011-05-14, 05:26 PM

Quote:

Originally Posted by Dean

Ahhh, gotcha. Really more of a crank bolt removal/install tool? The pulley isn't a problem after the damn bolt is loose thus no center threaded bit to push on the crank. Is it a 3/8 or 1/2" square drive just out of curiosity?

Now if only there was something like that for the cam pulleys that wasn't an expensive piece of crap or required the use of an old timing belt and pairs of vice grips, but I digress.

You got it. It is for a 1/2" socket wrench.

2011-05-12, 08:46 AM	#2
100_Percent_Juice (40 percent vodka) Real Name: Joel Join Date: Oct 2006 Location: Reno, NV Posts: 4,446 Car: 2004WRX Class: Baby-Hauler/GroceryGetter	Everyone can hate all they want, but there is no denying that you guys make some of the cleanest Subaru parts on the market. __________________ "A power nap is when you sleep on someone who is weaker than you." - Dimitri Martin

2011-05-12, 08:55 AM	#4
Dean Señor Cheap Bastarde Real Name: Dean Join Date: May 2003 Location: $99 Tire Store Posts: 9,294 Car: $.04 STI Class: Fast,Cheap & Reliable=STI Deal, did somebody say Deal? Oh, Dean, yeah that's me.	OK, what is the bracket for? 3 hex heads hold it on and it has what appears to be a 3/8" offset drive, but what the heck are the other 4+4 bolts & hexheads __________________ I am a Commodore PET --- Now get off my lawn you kids...

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GrimmSpeed Manual Boost Controller - Product Release	GrimmSpeed	Vendor Correspondence	6	2022-01-18 01:06 PM
GrimmSpeed IWG Brackets - New Product Release	GrimmSpeed	Vendor Correspondence	3	2010-07-15 08:00 AM
GrimmSpeed Air/Oil Separator - Product Release	GrimmSpeed	Vendor Correspondence	50	2010-06-11 08:53 AM
GrimmSpeed 160 Degree Thermostat - Product Release!	GrimmSpeed	Vendor Correspondence	34	2009-07-29 01:29 PM
GrimmSpeed 44mm EWG Up pipe - Product Release!	GrimmSpeed	Vendor Correspondence	1	2009-01-22 01:58 PM

2011-05-14, 04:01 PM	#8
knucklesplitter EJ205 Real Name: Matt Taylor Join Date: Jun 2005 Location: Cousin-Fck, Carolina Posts: 1,475 Wish in one hand and sht in the other...	Cory/MPREZIV builds or rebuilds several Subaru engines per month. I'm curious why he has never needed a crank pulley installation tool.