FS: Turbo kit (For N/A EJ18/EJ22/EJ25) - Subaru Enthusiasts Car Club of the Sierras

Kostamojen · 2004-06-12, 03:02 PM

Hi all, im selling my never installed turbo kit that was nearly a year in the making... Its just costing me too much money, and I dont have the cabability of getting it installed myself so i'm going to have to cut my losses. I appologize to everyone that I purchased some of the parts from only to never use them myself, but I just dont have a choice anymore. My loss is going to have to be someone elses gain...

Anyway, on to the details. Its a OEM parts designed turbo kit, based off of some other turbo kit setups that some other club members from NASIOC had put together and using their advice to get all the proper parts. It should be capable of at least 8psi, with a potential of running up to the stock WRX 14psi (I have a link to another club member who has almost the exact same setup and ran 14psi if you dont believe me

) Here is a list of what it includes:

UPDATE Parting everything out!!!

Pics http://community.webshots.com/album/152508081MNnVAj

SOLDWRX Turbo (TD04)
Apex-i S-AFC
SOLD Vortech RRFPR
Apex-i ITC
Greddy EGT Gauge w/ probe
VDO boost gauge + line
SOLDWRX turboback, with a straight pipe muffler section
WRX headers from a used EJ20G
WRX catless uppipe from a used EJ20G
SOLD Legacy Fuel Rails/Injectors (works for EJ18/EJ22 phase 1 motors)
SOLD WRX fuel pump + wire
Two Autometer steering column Gauge mounts
SOLD WRX Intercooler
stock BOV
Legacy Turbo X-member + swaybar
SOLD New Exhaust Gaskets
SOLD WRX water pump with new Thermostat/gaskets
SOLD WRX radiator hose
SOLD Aftermarket Silicone Intercooler hose (blue, like the Samco variety)
SOLD Oil Feed Line from ISR with Earl fitting
SOLD Oil Drain line with Earls fittings
SOLD Intake hosing, including a silicone 90 degree bend, silicone transition, 2 3" silicone connections, and a 3" mandrel bent U.
Various other hosing/lines/clamps/etc.

This WAS pretty much a complete turbo kit in terms of everything you will need. Some parts will still require some work, like extending the length of the intercooler hose, fabricating the intake properly, and taping the headers for the EGT probe.

Shipping would be really difficult for the exhaust parts and crossmember, so I'd prefere a local sale, but if you really really want it I can try to ship it.

If you have any questions feel free to post, PM me or Email me. I keep track of all 3 pretty well

Kevin M · 2004-06-13, 05:45 PM

Hey, I still want that EJ20. You've got PM.

ArthurS · 2004-06-14, 08:10 AM

Wow...sucks you have to sell. Good luck.

Kostamojen · 2004-06-24, 06:39 PM

BTW, im going to part this kit out now if anyone wants anything specific.

Kevin M · 2004-06-24, 09:47 PM

Quote:

Originally Posted by Kostamojen

BTW, im going to part this kit out now if anyone wants anything specific.

Yeah. I want the EJ20.

Kostamojen · 2004-06-24, 10:44 PM

Quote:

Originally Posted by BAN SUVS

Quote:

Originally Posted by Kostamojen

BTW, im going to part this kit out now if anyone wants anything specific.

Yeah. I want the EJ20.

Im still holding it for you, despite other offers

Kevin M · 2004-06-24, 11:01 PM

Sweeeet.

sperry · 2004-06-25, 07:59 AM

I dunno if I want to open this can of worms... but, what happened to this swap into your L Steve? Or why not swap this into the wagon... that would be one hell of a cool car IMO!

Kostamojen · 2004-06-25, 12:14 PM

It wont work on the wagon, LOL! Plus, im getting a MY98 RS motor for like 1/3rd of what this cost me to put together and will be far far easier to actually install, and without selling this kit I cant afford to go to the track day

Kostamojen · 2004-07-01, 11:28 AM

Updated

Kostamojen · 2004-07-13, 03:20 PM

Nobody needs anything? I'm parting it out.

Kevin M · 2004-07-13, 03:23 PM

Hang on to that crossmember, I'll need it for sure eventually.

2004-06-12, 03:02 PM	#1
Kostamojen EJ22 Join Date: Feb 2003 Location: Roseville, CA Posts: 380	FS: Turbo kit (For N/A EJ18/EJ22/EJ25) Hi all, im selling my never installed turbo kit that was nearly a year in the making... Its just costing me too much money, and I dont have the cabability of getting it installed myself so i'm going to have to cut my losses. I appologize to everyone that I purchased some of the parts from only to never use them myself, but I just dont have a choice anymore. My loss is going to have to be someone elses gain... Anyway, on to the details. Its a OEM parts designed turbo kit, based off of some other turbo kit setups that some other club members from NASIOC had put together and using their advice to get all the proper parts. It should be capable of at least 8psi, with a potential of running up to the stock WRX 14psi (I have a link to another club member who has almost the exact same setup and ran 14psi if you dont believe me ) Here is a list of what it includes: UPDATE Parting everything out!!! Pics http://community.webshots.com/album/152508081MNnVAj SOLDWRX Turbo (TD04) Apex-i S-AFC SOLD Vortech RRFPR Apex-i ITC Greddy EGT Gauge w/ probe VDO boost gauge + line SOLDWRX turboback, with a straight pipe muffler section WRX headers from a used EJ20G WRX catless uppipe from a used EJ20G SOLD Legacy Fuel Rails/Injectors (works for EJ18/EJ22 phase 1 motors) SOLD WRX fuel pump + wire Two Autometer steering column Gauge mounts SOLD WRX Intercooler stock BOV Legacy Turbo X-member + swaybar SOLD New Exhaust Gaskets SOLD WRX water pump with new Thermostat/gaskets SOLD WRX radiator hose SOLD Aftermarket Silicone Intercooler hose (blue, like the Samco variety) SOLD Oil Feed Line from ISR with Earl fitting SOLD Oil Drain line with Earls fittings SOLD Intake hosing, including a silicone 90 degree bend, silicone transition, 2 3" silicone connections, and a 3" mandrel bent U. Various other hosing/lines/clamps/etc. This WAS pretty much a complete turbo kit in terms of everything you will need. Some parts will still require some work, like extending the length of the intercooler hose, fabricating the intake properly, and taping the headers for the EGT probe. Shipping would be really difficult for the exhaust parts and crossmember, so I'd prefere a local sale, but if you really really want it I can try to ship it. If you have any questions feel free to post, PM me or Email me. I keep track of all 3 pretty well __________________ K-man

2004-06-13, 05:45 PM	#2
Kevin M EJ22T Join Date: Sep 2003 Location: Reno Posts: 9,445 Car: '93/'01 GF6, mostly red Class: 19 FP	Hey, I still want that EJ20. You've got PM. __________________ FWD is the new AWD

2004-06-14, 08:10 AM	#3
ArthurS EJ207 Join Date: Dec 2002 Location: Reno, NV Posts: 3,707 Car: 2011 Chevy Battle Wagon	Wow...sucks you have to sell. Good luck. __________________ Captain Murphy: I dub thee Sir Phobos, Knight of Mars, beater of ass. Be a hitter, babe.

2004-06-24, 06:39 PM	#4
Kostamojen EJ22 Join Date: Feb 2003 Location: Roseville, CA Posts: 380	BTW, im going to part this kit out now if anyone wants anything specific. __________________ K-man

2004-06-24, 11:01 PM	#7
Kevin M EJ22T Join Date: Sep 2003 Location: Reno Posts: 9,445 Car: '93/'01 GF6, mostly red Class: 19 FP	Sweeeet. __________________ FWD is the new AWD

2004-06-25, 07:59 AM	#8
sperry The Doink Real Name: Scott Join Date: Nov 2002 Location: Portland, OR Posts: 20,335 Car: '09 OBXT, '02 WRX, '96 Miata Class: PDX/TT-6 The way out is through	I dunno if I want to open this can of worms... but, what happened to this swap into your L Steve? Or why not swap this into the wagon... that would be one hell of a cool car IMO! __________________ Is you is, or is you ain't, my con-stit-u-ints?

2004-06-25, 12:14 PM	#9
Kostamojen EJ22 Join Date: Feb 2003 Location: Roseville, CA Posts: 380	It wont work on the wagon, LOL! Plus, im getting a MY98 RS motor for like 1/3rd of what this cost me to put together and will be far far easier to actually install, and without selling this kit I cant afford to go to the track day __________________ K-man

2004-07-01, 11:28 AM	#10
Kostamojen EJ22 Join Date: Feb 2003 Location: Roseville, CA Posts: 380	Updated __________________ K-man

2004-07-13, 03:20 PM	#11
Kostamojen EJ22 Join Date: Feb 2003 Location: Roseville, CA Posts: 380	Nobody needs anything? I'm parting it out. __________________ K-man

2004-07-13, 03:23 PM	#12
Kevin M EJ22T Join Date: Sep 2003 Location: Reno Posts: 9,445 Car: '93/'01 GF6, mostly red Class: 19 FP	Hang on to that crossmember, I'll need it for sure eventually. __________________ FWD is the new AWD

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
SCCA Club Trials car classification - take 2!	sperry	Motorsports Chat	17	2005-12-02 09:21 AM
Turbo XS utec + tuner kit	Evo Mike	User Classifieds	0	2005-09-04 01:44 PM
Another STi turbo kit ... 20 psi by 3200 rpm	MikeK	Technical Chat	13	2005-02-07 01:22 PM
Turbo Kit...	U53D	General Subaru Discussion & Club Chat	5	2004-09-16 07:10 AM
GT4 Car List	ArthurS	Off Topic Chat	4	2004-01-03 07:47 PM