Subaru Enthusiasts Car Club of the Sierras  

Go Back   Subaru Enthusiasts Car Club of the Sierras > Car Enthusiast Forums > Technical Chat

Technical Chat Ask and answer technical car questions.

Reply
 
Thread Tools
Old 2005-07-10, 07:02 PM   #1
LetItRev
R.I.P.
 
Join Date: Nov 2003
Location: Reno, Nevada
Posts: 501
 
Car: 2004 WRX
Default Tire Repair Opinions Sought

Last night I heard this sound coming from my rear left tire. It was consistent with the sound of a rock in the tread. I couldn't find a rock so I removed the wheel today and discovered a screw in the tread.

It is located about dead center on the Falken Azenis tread. The screw was at a slight angle and came out easily with some pliers. The length is about 3/8" with a diameter of approximately 1/8". I checked pressure about a half hour after removing the screw and detected no pressure loss.

I am wondering if I need to take this to a tire shop tomorrow and have it checked. I am curious if this was deep enough to cause damage. It may be a different story if I put the wheel back on the car and begin driving.

Any advice on good tire shops for flat repairs? Something near South Meadows?
LetItRev is offline   Reply With Quote
Old 2005-07-10, 08:21 PM   #2
Dean
Seņor Cheap Bastarde
 
Dean's Avatar
 
Real Name: Dean
Join Date: May 2003
Location: $99 Tire Store
Posts: 9,294
 
Car: $.04 STI
Class: Fast,Cheap & Reliable=STI
 
Deal, did somebody say Deal? Oh, Dean, yeah that's me.
Default

How much tread depth left on the Azenis, and how deep do you think the screw went? If A >= B you are done. No worries. If B > A, then all they can do is patch a hole that isn't there.
__________________
I am a Commodore PET --- Now get off my lawn you kids...
Dean is offline   Reply With Quote
Old 2005-07-10, 09:27 PM   #3
khail19
EJ205
 
Real Name: Khail
Join Date: Dec 2002
Location: Reno, NV
Posts: 1,769
 
Car: 2016 VW GTI
 
Meets? We have meets?
Default

I've had several instances where I've pulled a nail out of my tire with no leakage afterwards. Always with fairly new tires though. The one time it caused a puncture I was glad it did. The flat made me look closely at the tire, which was worn to the cords on the inside edge. That nail probably saved me from a blowout on the freeway or something. Those were also the fastest wearing tire I've owned (ContiSport 2 with around 8,000 miles on it), although I'm sure the excessive camber wasn't helping.
khail19 is offline   Reply With Quote
Old 2005-07-11, 08:39 PM   #4
LetItRev
R.I.P.
 
Join Date: Nov 2003
Location: Reno, Nevada
Posts: 501
 
Car: 2004 WRX
Default

I put the tire back on the car after it held it's pressure for 24 hours. I have it inflated to 50 pounds. I'll see what it says tomorrow.

Thanks for sharing the theories/experiences.
LetItRev is offline   Reply With Quote
Old 2005-07-12, 08:30 AM   #5
zpeed
EJ251
 
Real Name: Nat S
Join Date: Feb 2004
Location: Reno, NV USA
Posts: 743
 
Car: 06 S2000
Class: RNP & PDX
Default

Try soapy water to detect a small leak.
zpeed is offline   Reply With Quote
Old 2005-07-12, 08:40 AM   #6
Nick Koan
JDM Cowboy
 
Nick Koan's Avatar
 
Real Name: Nick
Join Date: Oct 2003
Location: Somewhere
Posts: 8,641
 
Car: 2015 Mazda 3
Default

Yeah, it might be a slow leak.

BTW, if you find a good tire place down here, let me know. I still have a flat I've been too lazy to fix.
__________________
While a standard engine is powered by a belt connected to the crankshaft, a turbo engine runs on its own exhaust steam, making it more energy efficient. -- CNN
Nick Koan is offline   Reply With Quote
Old 2005-07-12, 09:12 AM   #7
MikeK
Captain Turbo
 
MikeK's Avatar
 
Join Date: Feb 2004
Location: Reno
Posts: 3,318
 
Car: 05 STi
Default

I had a puncture repaired at Big-O once. They pulled the rubber off the rim and put a patch on the inside of the tyre. It cost me about $12.
MikeK is offline   Reply With Quote
Old 2005-07-12, 09:14 AM   #8
sperry
The Doink
 
sperry's Avatar
 
Real Name: Scott
Join Date: Nov 2002
Location: Portland, OR
Posts: 20,335
 
Car: '09 OBXT, '02 WRX, '96 Miata
Class: PDX/TT-6
 
The way out is through
Default

Quote:
Originally Posted by MikeK
I had a puncture repaired at Big-O once. They pulled the rubber off the rim and put a patch on the inside of the tyre. It cost me about $12.
Usually if it's just a nail or something, they can just do a plug w/o even taking the tire off the wheel.
__________________
Is you is, or is you ain't, my con-stit-u-ints?
sperry is offline   Reply With Quote
Old 2005-07-12, 12:13 PM   #9
Dean
Seņor Cheap Bastarde
 
Dean's Avatar
 
Real Name: Dean
Join Date: May 2003
Location: $99 Tire Store
Posts: 9,294
 
Car: $.04 STI
Class: Fast,Cheap & Reliable=STI
 
Deal, did somebody say Deal? Oh, Dean, yeah that's me.
Default

Quote:
Originally Posted by sperry
Usually if it's just a nail or something, they can just do a plug w/o even taking the tire off the wheel.
Plugs can be bad, because they often use a pointy rasp/file thing to "clear out" the hole for the plug. This often greatly increases the amount of damage to the steel and nylon belts/plys in the carcas of the tire.

On a 50K street tire where they use salt on the roads, I might get a plug to keep the salt water away from the steel, but on a 10K high performance tire in our climate, I'd just have it patched on the inside. If you can get them to put some of the black rubber cement type compound they use for the patch into the hole from the outside, all the better.
__________________
I am a Commodore PET --- Now get off my lawn you kids...
Dean is offline   Reply With Quote
Old 2005-07-12, 02:04 PM   #10
LetItRev
R.I.P.
 
Join Date: Nov 2003
Location: Reno, Nevada
Posts: 501
 
Car: 2004 WRX
Default

I drove the car today. No pressure loss. I'm still crossing my fingers.
LetItRev is offline   Reply With Quote
Old 2005-07-13, 06:17 AM   #11
khail19
EJ205
 
Real Name: Khail
Join Date: Dec 2002
Location: Reno, NV
Posts: 1,769
 
Car: 2016 VW GTI
 
Meets? We have meets?
Default

You should be fine if it hasn't leaked by now.
khail19 is offline   Reply With Quote
Old 2005-07-13, 10:53 AM   #12
LetItRev
R.I.P.
 
Join Date: Nov 2003
Location: Reno, Nevada
Posts: 501
 
Car: 2004 WRX
Default

Quote:
Originally Posted by khail19
You should be fine if it hasn't leaked by now.

I'm beginning to feel that way. I will still carry a full size spare and tools to quickly change the tire for a few more day though.
LetItRev is offline   Reply With Quote
Old 2005-07-13, 10:56 AM   #13
Nick Koan
JDM Cowboy
 
Nick Koan's Avatar
 
Real Name: Nick
Join Date: Oct 2003
Location: Somewhere
Posts: 8,641
 
Car: 2015 Mazda 3
Default

I've had flats that take more then a day to even show up.

Granted, I wasn't checking the pressure with a gauge constantly, but it would take 4-5 days to lose 10psi or so.
__________________
While a standard engine is powered by a belt connected to the crankshaft, a turbo engine runs on its own exhaust steam, making it more energy efficient. -- CNN
Nick Koan is offline   Reply With Quote
Old 2005-07-13, 01:12 PM   #14
doubleurx
EJ205
 
doubleurx's Avatar
 
Join Date: May 2004
Location: Truckee
Posts: 1,948
Default

Quote:
Originally Posted by nKoan
I've had flats that take more then a day to even show up.

Granted, I wasn't checking the pressure with a gauge constantly, but it would take 4-5 days to lose 10psi or so.

My 911 has a slow leak in one of the tires. It takes a couple weeks just to lose a couple PSI. Even when it sits all winter long it doesn't get completely flat.
doubleurx is offline   Reply With Quote
Old 2005-07-14, 06:48 AM   #15
MPREZIV
Token
 
MPREZIV's Avatar
 
Real Name: Le Stig Afrique?
Join Date: Jun 2005
Location: sitting next to a big yellow box
Posts: 3,588
 
Car: 2001 Impreza 2.5 RS
Class: 05 TDSP
 
No, I won't work on your car. F* your car
Default

In my professional opinion, NEVER plug a tire! Patches are okay, but plugs only make matters worse.

If anybody here in Reno needs a tire fixed, feel free to swing here by Nissan. I know we're Subi people, but I work at Nissan, and I'd be glad to help out. Ask for Cory. Costs about $12.

In fact, any kind of maintenance or repairs, we can't do any kind of warranty work obviously, but I'd be glad to offer good work from a reputable shop. Alignments, tires, A/C work, anything but body repairs!
__________________
"...these condoms have a topical anesthetic to reduce sensitivity, so you can last longer. What a paradox. You can't feel a thing, but you can f*ck for HOURS..."
MPREZIV is offline   Reply With Quote
Old 2005-07-14, 11:24 AM   #16
LetItRev
R.I.P.
 
Join Date: Nov 2003
Location: Reno, Nevada
Posts: 501
 
Car: 2004 WRX
Default

Hey Cory,

Thanks for that generous offer. If I continue to have issues with this tire I will give you a call.

As of now, I think the screw never made it through the tire. It's still holding pressure.

Last edited by LetItRev; 2005-07-14 at 05:11 PM.
LetItRev is offline   Reply With Quote
Old 2005-07-14, 01:02 PM   #17
MPREZIV
Token
 
MPREZIV's Avatar
 
Real Name: Le Stig Afrique?
Join Date: Jun 2005
Location: sitting next to a big yellow box
Posts: 3,588
 
Car: 2001 Impreza 2.5 RS
Class: 05 TDSP
 
No, I won't work on your car. F* your car
Default

No problem dude!
__________________
"...these condoms have a topical anesthetic to reduce sensitivity, so you can last longer. What a paradox. You can't feel a thing, but you can f*ck for HOURS..."
MPREZIV is offline   Reply With Quote
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Are RE070's legal in AutoX? Nick Koan Motorsports Chat 14 2006-01-28 02:10 PM
Reno SCCA Street Tire changes MattR Motorsports Chat 14 2005-12-27 03:35 PM
2005 PAX factors Kevin M Motorsports Chat 38 2005-04-27 10:35 AM
Track tire opinions MattR Technical Chat 17 2005-03-22 12:22 PM


All times are GMT -8. The time now is 02:22 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
All Content Copyright Subaru Enthusiasts Car Club of the Sierras unless otherwise noted.