Subaru Enthusiasts Car Club of the Sierras  

Go Back   Subaru Enthusiasts Car Club of the Sierras > Car Enthusiast Forums > Technical Chat

Technical Chat Ask and answer technical car questions.

Reply
 
Thread Tools
Old 2007-01-15, 04:23 PM   #351
sperry
The Doink
 
sperry's Avatar
 
Real Name: Scott
Join Date: Nov 2002
Location: Portland, OR
Posts: 20,335
 
Car: '09 OBXT, '02 WRX, '96 Miata
Class: PDX/TT-6
 
The way out is through
Default

Quote:
Originally Posted by Dean
I was just thinking. Matt's and my numbers are very similar. I wonder if the extra 10 HP can be accounted for with the divirced wastegate exhaust, the Walbro fuel pump, or the ACT Streetlight Flywheel and 6 puck clutch. I also had the light stock wheels and lighter non-race tires. My single high flow cat may well make less back pressure than Matt's muffler. The twister makes basically no resistance especially with the twist part out. And the fresh turbo vs. one with how many thousand miles? Matt, did you go colder plugs as well?
Well, it's not the fuel pump.
__________________
Is you is, or is you ain't, my con-stit-u-ints?
sperry is offline   Reply With Quote
Old 2007-01-15, 05:33 PM   #352
Dean
Señor Cheap Bastarde
 
Dean's Avatar
 
Real Name: Dean
Join Date: May 2003
Location: $99 Tire Store
Posts: 9,294
 
Car: $.04 STI
Class: Fast,Cheap & Reliable=STI
 
Deal, did somebody say Deal? Oh, Dean, yeah that's me.
Default

Quote:
Originally Posted by sperry
Well, it's not the fuel pump.
OK, maybe not the fuel pump. I also have an underdrive pulley. I'm just thinking that my numbers aren't really any better than Matt's considering the additional mods.

I assume Mike has the Weather station module or whatever for his dyno, or that could be it as well. It was damn near freezing when we ran my car.

I am just trying to understand the numbers if possible. Maybe we will never know, but thought it might be worth discussion.
__________________
I am a Commodore PET --- Now get off my lawn you kids...
Dean is offline   Reply With Quote
Old 2007-01-15, 06:12 PM   #353
Pat R.
EJ251
 
Pat R.'s Avatar
 
Join Date: Feb 2004
Location: Southeast Hades
Posts: 593
 
Car: Red
Class: Stockish
 
¿Quién es tu padre?
Default

I think a street race is in order.
__________________
Movin' to Montana soon, gonna be a dental floss tycoon.
Pat R. is offline   Reply With Quote
Old 2007-01-15, 07:06 PM   #354
sybir
The Don
 
sybir's Avatar
 
Real Name: Aaron
Join Date: Oct 2003
Location: Sacramento
Posts: 3,097
 
Car: '97 Legacy / '05 FXT
Class: low
Default

Dyno numbers are good for comparing before and after mods on the same car when all other factors are constant. Comparing between cars, because of many different factors, is asinine and pointless.

IBI'llstreeraceyoutodeath.
__________________
Tact is for people who aren't witty enough to be sarcastic.
sybir is offline   Reply With Quote
Old 2007-01-15, 07:22 PM   #355
MattR
El Matador
 
MattR's Avatar
 
Real Name: Matt
Join Date: Dec 2002
Location: Reno, NV
Posts: 10,660
 
Car: 2012 Toyota Tacoma
Class: ?
Default

Quote:
Originally Posted by Pat R.
I think a street race is in order.

That's how I solve all my issues


Dean, like Scott said I do have the same Fuel pump, so it's not that, nor can we blame it on the color. Also, I am catless with Gruppe-s headers.

It was very cool when we ran my car....like 55 degrees, and I also had my 18"x 8" Rotas with meaty Falkens on. That could be a big part of it.
__________________
"Dallas..We have a problem.”
MattR is offline   Reply With Quote
Old 2007-01-15, 11:34 PM   #356
sperry
The Doink
 
sperry's Avatar
 
Real Name: Scott
Join Date: Nov 2002
Location: Portland, OR
Posts: 20,335
 
Car: '09 OBXT, '02 WRX, '96 Miata
Class: PDX/TT-6
 
The way out is through
Default

Quote:
Originally Posted by MattR
Dean, like Scott said I do have the same Fuel pump, so it's not that
That was my point, not that the fuel pump doesn't make a difference. I actually thing the fuel pump is a great idea, as it makes the car safer if nothing else. Cheap insurance against running lean.
__________________
Is you is, or is you ain't, my con-stit-u-ints?
sperry is offline   Reply With Quote
Old 2007-01-16, 03:41 PM   #357
Dean
Señor Cheap Bastarde
 
Dean's Avatar
 
Real Name: Dean
Join Date: May 2003
Location: $99 Tire Store
Posts: 9,294
 
Car: $.04 STI
Class: Fast,Cheap & Reliable=STI
 
Deal, did somebody say Deal? Oh, Dean, yeah that's me.
Default

And I agree with Aaron, we can't really compare, but that doesn't stop us from doing so.

And I was just wondering if any of my other mods might be contributers to my numbers? I've always heard that rotating mass affects real world HP and torque numbers. (flywheel, clutch, underdrive, wheels/tires)

Colder plugs are supposed reduce detonation(?) and thus allow more power to be made???

Mike said something about the fuel pump increased pressure allowed for lower injector duty cycles...

I was just throwing those things around as possible discussion points as to whether they or the weather might impact dyno numbers.

All our cars Rock.

I devoured many Audis, Porsches, a Lotus and a race car or two at Thunderhill, and am still hungry. I want my DMSes back from Oh-Canada...
__________________
I am a Commodore PET --- Now get off my lawn you kids...
Dean is offline   Reply With Quote
Old 2007-01-16, 03:44 PM   #358
cody
Candy Mountain
 
cody's Avatar
 
Real Name: Cody
Join Date: May 2005
Location: Californication
Posts: 7,751
 
Car: 03 Pussy Wagon, now with more pink!
Class: TESP
 
OMG Internet!
Default

Quote:
Originally Posted by Dean
Colder plugs are supposed reduce detonation(?) and thus allow more power to be made???
Exactly. "Stage 2" and up can benefit from one step colder, especially before tuning, as I understand it.
cody is offline   Reply With Quote
Old 2007-01-16, 04:44 PM   #359
sperry
The Doink
 
sperry's Avatar
 
Real Name: Scott
Join Date: Nov 2002
Location: Portland, OR
Posts: 20,335
 
Car: '09 OBXT, '02 WRX, '96 Miata
Class: PDX/TT-6
 
The way out is through
Default

Quote:
Originally Posted by Dean
And I agree with Aaron, we can't really compare, but that doesn't stop us from doing so.

And I was just wondering if any of my other mods might be contributers to my numbers? I've always heard that rotating mass affects real world HP and torque numbers. (flywheel, clutch, underdrive, wheels/tires)

Colder plugs are supposed reduce detonation(?) and thus allow more power to be made???

Mike said something about the fuel pump increased pressure allowed for lower injector duty cycles...

I was just throwing those things around as possible discussion points as to whether they or the weather might impact dyno numbers.

All our cars Rock.

I devoured many Audis, Porsches, a Lotus and a race car or two at Thunderhill, and am still hungry. I want my DMSes back from Oh-Canada...
Dean...

Your tire: 235/40/17 = 24.4" diameter or 225/45/17 = 25.0" diameter

Matt's tire: 245/40/18 = 25.7" diameter

Matt's car probably makes more hp and torque than yours based on the tire gearing difference alone, nevermind the loss from turning 28lb 18" wheels.
__________________
Is you is, or is you ain't, my con-stit-u-ints?
sperry is offline   Reply With Quote
Old 2007-01-16, 05:10 PM   #360
Kevin M
EJ22T
 
Kevin M's Avatar
 
Join Date: Sep 2003
Location: Reno
Posts: 9,445
 
Car: '93/'01 GF6, mostly red
Class: 19 FP
Default

Yes, Dean, rotating mass and tire gearing both make a difference in at-the-wheels power. The pulley is practical negligible, the flywheel makes a difference, the wheels really help, and the tire size gets you another 5% or so torque to the ground compared to Matt.
__________________
FWD is the new AWD
Kevin M is offline   Reply With Quote
Old 2007-01-16, 05:13 PM   #361
Kevin M
EJ22T
 
Kevin M's Avatar
 
Join Date: Sep 2003
Location: Reno
Posts: 9,445
 
Car: '93/'01 GF6, mostly red
Class: 19 FP
Default

Oh, and "colder" plugs really are physically colder under hard conditions. They absorb less heat from the combustion cycle, which makes them less hot when that cylinder is on the intake or compression stroke, and they cause less pre-ignition. The downside is they foul more when you aren't getting high EGTs. Tuners pretty much universally think that's a good tradeoff, as long as you aren't fouling them so bad you get misfires when you do go WOT again.
__________________
FWD is the new AWD
Kevin M is offline   Reply With Quote
Old 2007-01-17, 07:07 AM   #362
Dean
Señor Cheap Bastarde
 
Dean's Avatar
 
Real Name: Dean
Join Date: May 2003
Location: $99 Tire Store
Posts: 9,294
 
Car: $.04 STI
Class: Fast,Cheap & Reliable=STI
 
Deal, did somebody say Deal? Oh, Dean, yeah that's me.
Default

Quote:
Originally Posted by sperry
Your tire: 235/40/17 = 24.4" diameter or 225/45/17 = 25.0" diameter
225/45-17s actually. Stockers with street tires were on. So no gearing advantage to speak of.
__________________
I am a Commodore PET --- Now get off my lawn you kids...
Dean is offline   Reply With Quote
Old 2007-01-17, 07:22 AM   #363
tysonK
warehouse SECCS
 
tysonK's Avatar
 
Join Date: Mar 2003
Location: SoCal...
Posts: 6,253
 
Car: 04 Evo 99 Cadillac
Class: street de le mod
Default

nos.
__________________
Anjali? Anjali?


tysonK is offline   Reply With Quote
Old 2007-01-17, 12:13 PM   #364
Kevin M
EJ22T
 
Kevin M's Avatar
 
Join Date: Sep 2003
Location: Reno
Posts: 9,445
 
Car: '93/'01 GF6, mostly red
Class: 19 FP
Default

Quote:
Originally Posted by Dean
225/45-17s actually. Stockers with street tires were on. So no gearing advantage to speak of.
You still had shorter, lighter wheels/tires than Matt, just not as much as 235/40s would be.
__________________
FWD is the new AWD
Kevin M is offline   Reply With Quote
Old 2007-01-17, 12:50 PM   #365
knucklesplitter
EJ205
 
Real Name: Matt Taylor
Join Date: Jun 2005
Location: Cousin-F*ck, Carolina
Posts: 1,474
 
Wish in one hand and sh*t in the other...
Default

If the effective gearing changes that are due to the tire diameter changes the horsepower that a dyno reads, then the dyno is not very good at reading horsepower. Actually dynos do not measure horsepower anyway - hp is just a calculated number based on torque and rpm. The dyno reads torque and rpm and then calculates hp from those two inputs. There should be a place to enter the tire diameter in the dyno's computer so that the difference in effective gearing does not change the hp, because changes in gearing just do not change horsepower (except in more extreme cases where the frictional losses change).

Also as far as rotating mass is concerned, if the car accelerates slow enough while it's on the dyno, the mass becomes a negligible factor. The faster the car accelerates on the dyno the more the mass will make a difference in the WHP. If a load-based dyno holds the car at a certain RPM and reads torque then the mass makes no difference.

Because of these and other factors, such as run-to-run variability in dynos and automobiles in general, it is silly to speculate about small differences in two diffent cars' HP as measured on a dyno. The dyno is a tool for tuning and should be used with extreme caution during bench racing.
knucklesplitter is offline   Reply With Quote
Old 2007-01-17, 01:01 PM   #366
knucklesplitter
EJ205
 
Real Name: Matt Taylor
Join Date: Jun 2005
Location: Cousin-F*ck, Carolina
Posts: 1,474
 
Wish in one hand and sh*t in the other...
Default

Quote:
Originally Posted by Dean
Mike said something about the fuel pump increased pressure allowed for lower injector duty cycles...
I doubt Mike said this, because it's not true. The pressure regulator on the fuel rail determines pressure at the injectors, not the fuel pump. The only way a fuel pump becomes a factor is when it runs out of flow capacity, then the rail pressure will drop, and then bad things start to happen.
knucklesplitter is offline   Reply With Quote
Old 2007-01-17, 01:16 PM   #367
100_Percent_Juice
(40 percent vodka)
 
100_Percent_Juice's Avatar
 
Real Name: Joel
Join Date: Oct 2006
Location: Reno, NV
Posts: 4,446
 
Car: 2004WRX
Class: Baby-Hauler/GroceryGetter
Default

Speaking of Fuel rails. When depending on mods should they be installed on a wrx?
__________________
"A power nap is when you sleep on someone who is weaker than you." - Dimitri Martin
100_Percent_Juice is offline   Reply With Quote
Old 2007-01-17, 01:23 PM   #368
sperry
The Doink
 
sperry's Avatar
 
Real Name: Scott
Join Date: Nov 2002
Location: Portland, OR
Posts: 20,335
 
Car: '09 OBXT, '02 WRX, '96 Miata
Class: PDX/TT-6
 
The way out is through
Default

Quote:
Originally Posted by knucklesplitter
If the effective gearing changes that are due to the tire diameter changes the horsepower that a dyno reads, then the dyno is not very good at reading horsepower. Actually dynos do not measure horsepower anyway - hp is just a calculated number based on torque and rpm. The dyno reads torque and rpm and then calculates hp from those two inputs. There should be a place to enter the tire diameter in the dyno's computer so that the difference in effective gearing does not change the hp, because changes in gearing just do not change horsepower (except in more extreme cases where the frictional losses change).

Also as far as rotating mass is concerned, if the car accelerates slow enough while it's on the dyno, the mass becomes a negligible factor. The faster the car accelerates on the dyno the more the mass will make a difference in the WHP. If a load-based dyno holds the car at a certain RPM and reads torque then the mass makes no difference.

Because of these and other factors, such as run-to-run variability in dynos and automobiles in general, it is silly to speculate about small differences in two diffent cars' HP as measured on a dyno. The dyno is a tool for tuning and should be used with extreme caution during bench racing.
I've never seen a tuner that calculates and enters tire diameter on a dyno per run. I'm willing to bet Matt and Dean were dyno'd with the same settings.

Furthermore, dyno's are easily +/-5hp from run to run, let alone from car to car on different days. i.e. It's ridiculous for Dean to be trying to figure out why he made more hp than Matt. My post regarding the tire sizes was an attempt to demonstrate that Dean's speculating on things that probably make no repeatably observable difference, while he's ignoring things that are known to have more of an effect on numbers.

In reality, I would say anything +/-20hp on a dyno is pretty much similar enough to write off as "the same". On the track the faster car between Matt and Dean will be based on the driver, not the dyno'd hp. Trying to figure out vf39 vs. vf43 based on the data in this thread is a waste of time. According to the data and the margin of error involved, the turbos are equivalent. Same goes with all the rest of the differences between Dean and Matt's cars.
__________________
Is you is, or is you ain't, my con-stit-u-ints?
sperry is offline   Reply With Quote
Old 2007-01-17, 01:54 PM   #369
knucklesplitter
EJ205
 
Real Name: Matt Taylor
Join Date: Jun 2005
Location: Cousin-F*ck, Carolina
Posts: 1,474
 
Wish in one hand and sh*t in the other...
Default

Quote:
Originally Posted by 100_Percent_Juice
Speaking of Fuel rails. When depending on mods should they be installed on a wrx?
When/if you hit 450awhp, then you might need fuel rails. The factory design is pretty damn good on our cars. Don't buy the stuff you might hear/read about certain cylinders going lean due to the fuel rails. There are plenty of people maxing out 800+cc fuel injectors on the stock rails.
knucklesplitter is offline   Reply With Quote
Old 2007-01-17, 02:03 PM   #370
knucklesplitter
EJ205
 
Real Name: Matt Taylor
Join Date: Jun 2005
Location: Cousin-F*ck, Carolina
Posts: 1,474
 
Wish in one hand and sh*t in the other...
Default

Quote:
Originally Posted by sperry
In reality, I would say anything +/-20hp on a dyno is pretty much similar enough to write off as "the same". On the track the faster car between Matt and Dean will be based on the driver, not the dyno'd hp. Trying to figure out vf39 vs. vf43 based on the data in this thread is a waste of time. According to the data and the margin of error involved, the turbos are equivalent. Same goes with all the rest of the differences between Dean and Matt's cars.
I think you and I are agreeing here, but I came at it in a different way.

With statistical analysis you could detect small changes or differences, but the sampling size would be large - maybe like dyno'ing both cars 10 or 20 times.

The best practical measure of "real-world" horsepower at the wheels is to run the car on the dragstrip several times and watch the trap speed (not the ET). Trap speed is a good indicator of HP because the gearing, tires, and a relatively competent driver have little to do with it, but power does. Here again though, it takes a sample size of maybe 10-20 runs to see small changes.
knucklesplitter is offline   Reply With Quote
Old 2007-01-17, 02:27 PM   #371
Dean
Señor Cheap Bastarde
 
Dean's Avatar
 
Real Name: Dean
Join Date: May 2003
Location: $99 Tire Store
Posts: 9,294
 
Car: $.04 STI
Class: Fast,Cheap & Reliable=STI
 
Deal, did somebody say Deal? Oh, Dean, yeah that's me.
Default

So what I am hearing is that I need more stickers to have more HP than Matt.
__________________
I am a Commodore PET --- Now get off my lawn you kids...
Dean is offline   Reply With Quote
Old 2007-01-17, 02:54 PM   #372
100_Percent_Juice
(40 percent vodka)
 
100_Percent_Juice's Avatar
 
Real Name: Joel
Join Date: Oct 2006
Location: Reno, NV
Posts: 4,446
 
Car: 2004WRX
Class: Baby-Hauler/GroceryGetter
Default

Exactly^ NOW POST THAT FOOTAGE OF THUNDERHILL!!!!!!!!!!!!
__________________
"A power nap is when you sleep on someone who is weaker than you." - Dimitri Martin
100_Percent_Juice is offline   Reply With Quote
Old 2007-01-17, 03:07 PM   #373
Double Phister
EJ22
 
Double Phister's Avatar
 
Join Date: Mar 2005
Location: Elk Grove, CA
Posts: 450
 
Car: 2005 WRX STi
 
"I'm sideways and in control... I look good."
Default

Just out of curiosity.... Did Mike measure the RPM at the engine or did he just use wheel speed? If wheel speed is used to determine engine RPM was it modified for each car or just left at some generic multiplier/ratio?
__________________
Dan - '05 Black WRX STi.
My Mods
Double Phister is offline   Reply With Quote
Old 2007-01-21, 12:20 AM   #374
GST Mike
EJ22
 
Join Date: Apr 2005
Location: Hayward, CA
Posts: 191
 
Car: Zee L
 
Load, Efficiency, MAP etc etc etc
Default

Quote:
Originally Posted by R4ND0M_AX3
Just out of curiosity.... Did Mike measure the RPM at the engine or did he just use wheel speed? If wheel speed is used to determine engine RPM was it modified for each car or just left at some generic multiplier/ratio?
You can't leave it measured off of the roller speed for different cars, that would not work and would give some funny readings.

All cars are setup on the dyno, rolled, restrapped, rolled again than set at 3k in the gear being used to dyno in.

We do not use any weather correction, tried it once found the results to variable to uninstalled the contraption and threw it away. Our Mustang is configured off of one setting so cold weather will come into play as will hot weather (like real world, cars with cooler air make more power).

I hope this helps somewhat, personally I think the headers, uppipe and turbo are the differences.

Mike
GST Mike is offline   Reply With Quote
Old 2007-02-15, 11:02 AM   #375
killer60foot
EJ22
 
Real Name: Greg T
Join Date: Nov 2006
Location: Reno
Posts: 116
 
Car: 01 IS300
Default

So who has the biggest hp car on here...???? I bet i have yo beat as of this last monday....
killer60foot is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Dyno Numbers... U53D General Subaru Discussion & Club Chat 5 2005-08-19 07:04 AM
Dyno Day Dec. 11th Nick Koan General Subaru Discussion & Club Chat 10 2004-11-19 10:02 PM
NEWEST EVO dyno numbers. Evo Mike General Subaru Discussion & Club Chat 12 2004-09-27 07:36 PM
S2 Dyno numbers *evo* Evo Mike General Subaru Discussion & Club Chat 32 2004-09-25 09:21 AM
Credit card numbers AtomicLabMonkey Off Topic Chat 1 2004-09-17 11:45 AM


All times are GMT -8. The time now is 10:34 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
All Content Copyright Subaru Enthusiasts Car Club of the Sierras unless otherwise noted.