Internal Wastegate Brackets - no more welding for ewg setups - Subaru Enthusiasts Car Club of the Sierras

GrimmSpeed · 2008-05-08, 08:37 PM

The internal wastegate(IWG) bracket is used in place of the stock wastegate actuator when moving to an external wastegate setup. In the previous years Subaru owners had to weld the IWG shut on their turbos which diminished resale value, had the chance of cracking, and made it very difficult to revert back to the stock.

Through a partnership between GrimmSpeed and Area1320 we are bringing you the solution to this problem, the IWG Bracket. This is a basic bolt-on which takes 5 minutes to install. No more worrying about the wastegate door opening due to a cracked weld, no more worrying about trying to sell your turbo with welding all over the wastegate door. Feel like reverting back to stock?...simple, just unbolt the bracket and you are good to go.

TD04 Turbos

VF Series Turbos(vf30, vf34, vf39, vf43, etc)

FP Green and FP Red

Deadbolt 16g/18g/20g

Bracket on Turbo

WHERE TO FIND:

TD04
http://www.grimmspeed.com/catalog/pr...roducts_id=128

VF Series
http://www.grimmspeed.com/catalog/pr...roducts_id=127

FP Green/FP Red
http://www.grimmspeed.com/catalog/pr...roducts_id=129

DB 16g/18g/20g
http://www.grimmspeed.com/catalog/pr...roducts_id=131

PRICE: 24.99

Justin
http://www.grimmspeed.com

sperry · 2008-05-09, 09:17 AM

That's a great idea... I'm surprised it's taken this long to see something like this.

...'course, aren't most people that go to an EWG doing so because they upgraded to a turbo that has no IWG?

GrimmSpeed · 2008-05-09, 09:47 AM

Quote:

Originally Posted by sperry

That's a great idea... I'm surprised it's taken this long to see something like this.

...'course, aren't most people that go to an EWG doing so because they upgraded to a turbo that has no IWG?

thanks! there are definitely alot of stock location turbo guys going ewg.

2008-05-08, 08:37 PM	#1
GrimmSpeed EJ22 Join Date: May 2008 Posts: 244	Internal Wastegate Brackets - no more welding for ewg setups The internal wastegate(IWG) bracket is used in place of the stock wastegate actuator when moving to an external wastegate setup. In the previous years Subaru owners had to weld the IWG shut on their turbos which diminished resale value, had the chance of cracking, and made it very difficult to revert back to the stock. Through a partnership between GrimmSpeed and Area1320 we are bringing you the solution to this problem, the IWG Bracket. This is a basic bolt-on which takes 5 minutes to install. No more worrying about the wastegate door opening due to a cracked weld, no more worrying about trying to sell your turbo with welding all over the wastegate door. Feel like reverting back to stock?...simple, just unbolt the bracket and you are good to go. TD04 Turbos VF Series Turbos(vf30, vf34, vf39, vf43, etc) FP Green and FP Red Deadbolt 16g/18g/20g Bracket on Turbo WHERE TO FIND: TD04 http://www.grimmspeed.com/catalog/pr...roducts_id=128 VF Series http://www.grimmspeed.com/catalog/pr...roducts_id=127 FP Green/FP Red http://www.grimmspeed.com/catalog/pr...roducts_id=129 DB 16g/18g/20g http://www.grimmspeed.com/catalog/pr...roducts_id=131 PRICE: 24.99 Justin http://www.grimmspeed.com

2008-05-09, 09:17 AM	#2
sperry The Doink Real Name: Scott Join Date: Nov 2002 Location: Portland, OR Posts: 20,335 Car: '09 OBXT, '02 WRX, '96 Miata Class: PDX/TT-6 The way out is through	That's a great idea... I'm surprised it's taken this long to see something like this. ...'course, aren't most people that go to an EWG doing so because they upgraded to a turbo that has no IWG? __________________ Is you is, or is you ain't, my con-stit-u-ints?