Khail rules. - Subaru Enthusiasts Car Club of the Sierras

sperry · 2003-03-10, 12:59 PM

I dropped by Napa over the weekend to see if I could find some gasket material to finally rid myself of that damned up-pipe leak. I saw Khails "WRS" parked outside, so I was like... sweeeet.

Anyway, Khail and his coworked parsed through their catalog trying to find me something that would work that was cheaper than the $70 for a sheet of flexible graphite. Low and behold Khail found this ceramic looking stuff that said it was "sutable for exhaust and turbo gasket applications"... sounds just about right, right?

Well, it was $22... but since I "work for Alpine Roofing" according to Khails buddy... $8.. cha-ching!!

So I took that shit home and went to work with various tools, trying to cut my own gaskets... Hole-saw? doesn't work. Roto-Zip? doesn't work. Dremel? doesn't work. Cordless Drill? doesn't work. So, after I ran out of power tools... I grabbed my scissors. They work. F-me and my power tool mentality! It took 6 failures before I actually cut out a pair of useable gaskets.

So I dropped the header, and wedged a pair of these gaskets in there. Torqued everything back up. Then hit the test drive. No leaks!!! Went from a cool engine to a hot-as-hell engine and I hear zero leaks. Then this morning, gave it a good push on a really cold motor (which I normally avoid doing) and it still didn't leak. I think I may *finally* have this up-pipe leak licked!! Oh, and I can drop the passenger side header in literally 2 minutes now that I've practiced it so much over the last 6 months.

Thanks a ton Khail!! Hey, you need to show up to the next meet, we got new people that haven't seen the WRS.

MattR · 2003-03-10, 11:38 PM

khail does rule

ZER026D · 2003-03-10, 11:46 PM

I got some NGK plugs at napa like six months ago and there not the ones I want to put in I still have the box and receipt I want to get some colder ones I wonder if he will help me out.

khail19 · 2003-03-18, 01:32 AM

Scott,

I'm glad that stuff worked out for you. And if it makes you feel any better, I wouldn't have tried scissors first either.

ZERO26D,

It shouldn't be a problem as long as you bring the receipt. We don't stock too many NGK plugs, but I'm sure we can order the ones you need if we don't have them. I work at the Napa on Wrondel, except for Sunday. I'm at the Glendale store Sunday, and I'm off Wednesday and Thursday. Swing by and I'll see if I can help you out.

ZER026D · 2003-03-18, 09:02 AM

Word I'll come buy this week some time. I am going down to take some pics of my car I might get it back today.

sperry · 2003-03-18, 11:57 AM

Hey Khail,

Do either of the Napa stores you're at have parts for building an STi Projector wiring harness?

More specifically, I need a 9007 adapter (would be the same as a 9007 light bulb) and a 9005 connector (plugs into a 9005 bulb):

I know I can order from NASIOC vendors, but at $50 and up... that seems a little steep for somthing I can make myself in 10 minutes.

khail19 · 2003-03-20, 11:09 PM

I'll see what I can find tomorrow at work. I think we have the 9005 plug, but the 9007 adapter will be the tricky part.

Khail

sperry · 2003-03-21, 08:54 AM

Quote:

Originally Posted by khail19

I'll see what I can find tomorrow at work. I think we have the 9005 plug, but the 9007 adapter will be the tricky part.

Khail

Yeah, I was able to find the 9005 plugs already... but that 9007 is like sachrin, no one uses it!

khail19 · 2003-03-23, 11:39 PM

Well, I found 9005 plugs, but it looks like you already got those. I saw nothing for 9007 plugs, though. Somebody must make them, but I don't know who.

Khail

sperry · 2003-03-24, 08:48 AM

Quote:

Originally Posted by khail19

Well, I found 9005 plugs, but it looks like you already got those. I saw nothing for 9007 plugs, though. Somebody must make them, but I don't know who.

Khail

Thanks for looking! I'll just plan to make due w/o, but if you come across anything let me know!

khail19 · 2003-03-25, 08:20 PM

You got it.

Khail

2003-03-10, 12:59 PM	#1
sperry The Doink Real Name: Scott Join Date: Nov 2002 Location: Portland, OR Posts: 20,335 Car: '09 OBXT, '02 WRX, '96 Miata Class: PDX/TT-6 The way out is through	Khail rules. I dropped by Napa over the weekend to see if I could find some gasket material to finally rid myself of that damned up-pipe leak. I saw Khails "WRS" parked outside, so I was like... sweeeet. Anyway, Khail and his coworked parsed through their catalog trying to find me something that would work that was cheaper than the $70 for a sheet of flexible graphite. Low and behold Khail found this ceramic looking stuff that said it was "sutable for exhaust and turbo gasket applications"... sounds just about right, right? Well, it was $22... but since I "work for Alpine Roofing" according to Khails buddy... $8.. cha-ching!! So I took that shit home and went to work with various tools, trying to cut my own gaskets... Hole-saw? doesn't work. Roto-Zip? doesn't work. Dremel? doesn't work. Cordless Drill? doesn't work. So, after I ran out of power tools... I grabbed my scissors. They work. F-me and my power tool mentality! It took 6 failures before I actually cut out a pair of useable gaskets. So I dropped the header, and wedged a pair of these gaskets in there. Torqued everything back up. Then hit the test drive. No leaks!!! Went from a cool engine to a hot-as-hell engine and I hear zero leaks. Then this morning, gave it a good push on a really cold motor (which I normally avoid doing) and it still didn't leak. I think I may finally have this up-pipe leak licked!! Oh, and I can drop the passenger side header in literally 2 minutes now that I've practiced it so much over the last 6 months. Thanks a ton Khail!! Hey, you need to show up to the next meet, we got new people that haven't seen the WRS. __________________ Is you is, or is you ain't, my con-stit-u-ints?

2003-03-18, 11:57 AM	#6
sperry The Doink Real Name: Scott Join Date: Nov 2002 Location: Portland, OR Posts: 20,335 Car: '09 OBXT, '02 WRX, '96 Miata Class: PDX/TT-6 The way out is through	Hey Khail, Do either of the Napa stores you're at have parts for building an STi Projector wiring harness? More specifically, I need a 9007 adapter (would be the same as a 9007 light bulb) and a 9005 connector (plugs into a 9005 bulb): I know I can order from NASIOC vendors, but at $50 and up... that seems a little steep for somthing I can make myself in 10 minutes. __________________ Is you is, or is you ain't, my con-stit-u-ints?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GT4 Challenge	cody	General Subaru Discussion & Club Chat	1131	2017-11-23 06:09 PM
How to figure out your autocross class in a Subaru	Kevin M	Motorsports Chat	5	2005-04-29 08:24 AM
What class am I???	khail19	Motorsports Chat	14	2005-04-28 01:35 PM
Shifter Bushings (Attn: khail)	imprezton	Technical Chat	1	2003-01-14 06:24 PM

2003-03-10, 11:38 PM	#2
MattR El Matador Real Name: Matt Join Date: Dec 2002 Location: Reno, NV Posts: 10,660 Car: 2012 Toyota Tacoma Class: ?	khail does rule

2003-03-10, 11:46 PM	#3
ZER026D EJ251 Join Date: Jan 2003 Posts: 616 Car: 01 is300 / 87 rx4 Class: ? drive fast take chances	I got some NGK plugs at napa like six months ago and there not the ones I want to put in I still have the box and receipt I want to get some colder ones I wonder if he will help me out.

2003-03-18, 01:32 AM	#4
khail19 EJ205 Real Name: Khail Join Date: Dec 2002 Location: Reno, NV Posts: 1,769 Car: 2016 VW GTI Meets? We have meets?	Scott, I'm glad that stuff worked out for you. And if it makes you feel any better, I wouldn't have tried scissors first either. ZERO26D, It shouldn't be a problem as long as you bring the receipt. We don't stock too many NGK plugs, but I'm sure we can order the ones you need if we don't have them. I work at the Napa on Wrondel, except for Sunday. I'm at the Glendale store Sunday, and I'm off Wednesday and Thursday. Swing by and I'll see if I can help you out.

2003-03-18, 09:02 AM	#5
ZER026D EJ251 Join Date: Jan 2003 Posts: 616 Car: 01 is300 / 87 rx4 Class: ? drive fast take chances	Word I'll come buy this week some time. I am going down to take some pics of my car I might get it back today.

2003-03-20, 11:09 PM	#7
khail19 EJ205 Real Name: Khail Join Date: Dec 2002 Location: Reno, NV Posts: 1,769 Car: 2016 VW GTI Meets? We have meets?	I'll see what I can find tomorrow at work. I think we have the 9005 plug, but the 9007 adapter will be the tricky part. Khail

2003-03-23, 11:39 PM	#9
khail19 EJ205 Real Name: Khail Join Date: Dec 2002 Location: Reno, NV Posts: 1,769 Car: 2016 VW GTI Meets? We have meets?	Well, I found 9005 plugs, but it looks like you already got those. I saw nothing for 9007 plugs, though. Somebody must make them, but I don't know who. Khail

2003-03-25, 08:20 PM	#11
khail19 EJ205 Real Name: Khail Join Date: Dec 2002 Location: Reno, NV Posts: 1,769 Car: 2016 VW GTI Meets? We have meets?	You got it. Khail