Downgrading sale - Subaru Enthusiasts Car Club of the Sierras

sperry · 2010-12-23, 03:38 PM

I'm finally getting around to dialing back my WRX a bit to make it more streetable. As it is, I get just a few days every year at the track to enjoy the car, so I'm hoping to make it a bit quieter and softer so I can drive it on weekends for fun and not just at the track.

So, here's the stuff I'm contemplating ditching in order to soften the car...

Perrin FMIC - intercooler core has been anodized black, pipes powdercoated black, red silicone connectors/hoses, full T-bar clamps. I think I have the Perrin radiator overflow tank as well, but I'd have to find it, otherwise the kit is complete. It also includes a blow-thru MAF housing on the cold side piping, as well as a water/meth injection port just before the throttle body. $950

Perrin Turbo Inlet Hose - Silicone, red. 2.5" turbo inlet. Includes billet plugs for the unused ports on it (allows you to run with the GST AOS below, and no EVAP). $125

Kspeed CAI - Red/Black silicone, black powdercoated pipes, K&N filter, filter water guard. Installs in the fender. $125

GST Air/Oil Separator - aka the "Donkey Kong Barrel", same AOS used on the GST Time Attack Impreza. Mounts to firewall, breathes the heads and crankcase separately to atmosphere, oil drain back to case. Requires a FMIC. $400

Invidia Turbo-Back Exhaust - stainless, cat-less, bellmouth, with resonator and straight-thru muffler. Sounds great, but is pretty loud even with the resonator taking out a lot of the droning. Has dual O2 sensor ports, so you can run the factory sensor plus a wideband. $450

Bosch Motorsports Fuel Pump & Swirl Can - Bosch Motorsports pump model FP200 (p/n: 0 580 254 044), 200 l/hr @ 5 bar. Swirlcan fabricated by GST Motorsports. Includes basic brackets, hoses, wiring for relay to stock fuel pump. $200

Everything, except the FMIC core, and the mid-pipe back of the TBE is off the car. Since it just came off, I haven't had a chance to clean it all up yet, but everything will get a nice bath before it goes off to its new home. Parts do have some wear, but nothing major, and everything is fully functional and in great working condition.

If anyone is interested in the full intake track (CAI, turbo inlet, FMIC) I'll knock off $200 and sell it for an even $1000.

Prices do not include shipping, though I can probably work something out for delivering to Sac.

sedonabugeye · 2010-12-24, 04:47 PM

kinda tempted on the perrin fmic.. but im tired of spending ALLL of my money on my car right now.. lol

sperry · 2010-12-26, 12:49 PM

Quote:

Originally Posted by sedonabugeye

kinda tempted on the perrin fmic.. but im tired of spending ALLL of my money on my car right now.. lol

If I throw in my bugeye bumper that's pre-cut for the FMIC, would that change your mind?

sedonabugeye · 2010-12-26, 12:58 PM

haha.. mine is already cut out for a fmic.. i dont think mine is quite as big though.. ill trade you fmic's and a little cash

haha!

IheartSTI · 2010-12-26, 07:46 PM

come on andy go big!

WRXlerate · 2010-12-27, 01:17 PM

Would you be willing to sell just the invidia DP or are you wanting to sell the entire exhaust as a package deal?

WRX06TR · 2010-12-28, 04:06 PM

If you sell that downpipe I will trade you my catback for the Invidia catback.

Dean · 2010-12-28, 05:08 PM

Potential dibs on any left over non-stock cat/axle back from John & Nick's chaos.

WRX06TR · 2010-12-28, 07:55 PM

What exhaust are you looking for Dean?

sperry · 2010-12-29, 03:44 PM

I don't think the Invidia mixes and matches with other bits, does it?

Either way, if you guys want to pool your money and split it up, I have no problem with that. Just work it out and let me know who's getting what. But I don't need a trade, I've already got a full TBE ready to go on the car.

sperry · 2010-12-29, 03:46 PM

Quote:

Originally Posted by sedonabugeye

haha.. mine is already cut out for a fmic.. i dont think mine is quite as big though.. ill trade you fmic's and a little cash

haha!

I'd be willing to trade for a good TMIC plus cash. I really want a Process West TMIC, but they're kinda expensive for what you get.

WRX06TR · 2010-12-29, 04:01 PM

I believe the Invidia will mix, but I'm not 100%. I didn't want to buy an exhaust, just a trade for a little change. Thanks tho.

sedonabugeye · 2010-12-29, 09:15 PM

Quote:

Originally Posted by sperry

I'd be willing to trade for a good TMIC plus cash. I really want a Process West TMIC, but they're kinda expensive for what you get.

I dont have any bigger tmic's left. shipping out the last one tomrrow actually. and that tmic is still $800 that I dont have right now.

sperry · 2011-01-09, 02:25 PM

Bump! Swirl can and fuel pump added.

IheartSTI · 2011-01-10, 12:43 PM

Scott please call me about the surge tank and pump. 775 200 5561 -sam

sperry · 2011-01-10, 02:01 PM

Quote:

Originally Posted by IheartSTI

Scott please call me about the surge tank and pump. 775 200 5561 -sam

I'm at work right now so I can't call, but I can still look busy while answering PMs.

Send me a PM? Or I'll give you a call this evening.

2010-12-23, 03:38 PM	#1
sperry The Doink Real Name: Scott Join Date: Nov 2002 Location: Portland, OR Posts: 20,335 Car: '09 OBXT, '02 WRX, '96 Miata Class: PDX/TT-6 The way out is through	Downgrading sale I'm finally getting around to dialing back my WRX a bit to make it more streetable. As it is, I get just a few days every year at the track to enjoy the car, so I'm hoping to make it a bit quieter and softer so I can drive it on weekends for fun and not just at the track. So, here's the stuff I'm contemplating ditching in order to soften the car... Perrin FMIC - intercooler core has been anodized black, pipes powdercoated black, red silicone connectors/hoses, full T-bar clamps. I think I have the Perrin radiator overflow tank as well, but I'd have to find it, otherwise the kit is complete. It also includes a blow-thru MAF housing on the cold side piping, as well as a water/meth injection port just before the throttle body. $950 Perrin Turbo Inlet Hose - Silicone, red. 2.5" turbo inlet. Includes billet plugs for the unused ports on it (allows you to run with the GST AOS below, and no EVAP). $125 Kspeed CAI - Red/Black silicone, black powdercoated pipes, K&N filter, filter water guard. Installs in the fender. $125 GST Air/Oil Separator - aka the "Donkey Kong Barrel", same AOS used on the GST Time Attack Impreza. Mounts to firewall, breathes the heads and crankcase separately to atmosphere, oil drain back to case. Requires a FMIC. $400 Invidia Turbo-Back Exhaust - stainless, cat-less, bellmouth, with resonator and straight-thru muffler. Sounds great, but is pretty loud even with the resonator taking out a lot of the droning. Has dual O2 sensor ports, so you can run the factory sensor plus a wideband. $450 Bosch Motorsports Fuel Pump & Swirl Can - Bosch Motorsports pump model FP200 (p/n: 0 580 254 044), 200 l/hr @ 5 bar. Swirlcan fabricated by GST Motorsports. Includes basic brackets, hoses, wiring for relay to stock fuel pump. $200 Everything, except the FMIC core, and the mid-pipe back of the TBE is off the car. Since it just came off, I haven't had a chance to clean it all up yet, but everything will get a nice bath before it goes off to its new home. Parts do have some wear, but nothing major, and everything is fully functional and in great working condition. If anyone is interested in the full intake track (CAI, turbo inlet, FMIC) I'll knock off $200 and sell it for an even $1000. Prices do not include shipping, though I can probably work something out for delivering to Sac. __________________ Is you is, or is you ain't, my con-stit-u-ints? Last edited by sperry; 2011-01-09 at 02:24 PM.

2010-12-24, 04:47 PM	#2
sedonabugeye EJ251 Real Name: Andy Join Date: Feb 2009 Location: Sparks Posts: 566 Car: Leggy wagon/Bugeye/megacab	kinda tempted on the perrin fmic.. but im tired of spending ALLL of my money on my car right now.. lol __________________ UNRIVALED PERFORMANCE. E-85 gt35r'd bugeye. 490whp/414wtq

2010-12-26, 12:58 PM	#4
sedonabugeye EJ251 Real Name: Andy Join Date: Feb 2009 Location: Sparks Posts: 566 Car: Leggy wagon/Bugeye/megacab	haha.. mine is already cut out for a fmic.. i dont think mine is quite as big though.. ill trade you fmic's and a little cash haha! __________________ UNRIVALED PERFORMANCE. E-85 gt35r'd bugeye. 490whp/414wtq

2010-12-26, 07:46 PM	#5
IheartSTI EJ22 Join Date: Jun 2004 Location: Reno soon.... Posts: 473 Car: 05 sti and 08 honda fit have fun	come on andy go big! __________________ live one day at a time

2010-12-27, 01:17 PM	#6
WRXlerate EJ22 Real Name: John B. Join Date: May 2005 Location: Behind a brick wall. Posts: 471 Car: 02 Soccermom Wagon Class: "sleeper" Destroying V8 Egos 4 cylinders at a time	Would you be willing to sell just the invidia DP or are you wanting to sell the entire exhaust as a package deal? __________________ Stuff sold by the gram is always more exciting than stuff sold by the pound. JC

2010-12-28, 04:06 PM	#7
WRX06TR EJ251 Real Name: Nick P Join Date: Dec 2006 Location: Reno Posts: 881 Car: 2005 STi Class: MadtyteTunerBro! Back to the studio!	If you sell that downpipe I will trade you my catback for the Invidia catback.

2010-12-28, 05:08 PM	#8
Dean Señor Cheap Bastarde Real Name: Dean Join Date: May 2003 Location: $99 Tire Store Posts: 9,294 Car: $.04 STI Class: Fast,Cheap & Reliable=STI Deal, did somebody say Deal? Oh, Dean, yeah that's me.	Potential dibs on any left over non-stock cat/axle back from John & Nick's chaos. __________________ I am a Commodore PET --- Now get off my lawn you kids... Last edited by Dean; 2010-12-28 at 08:59 PM.

2010-12-28, 07:55 PM	#9
WRX06TR EJ251 Real Name: Nick P Join Date: Dec 2006 Location: Reno Posts: 881 Car: 2005 STi Class: MadtyteTunerBro! Back to the studio!	What exhaust are you looking for Dean?

2010-12-29, 03:44 PM	#10
sperry The Doink Real Name: Scott Join Date: Nov 2002 Location: Portland, OR Posts: 20,335 Car: '09 OBXT, '02 WRX, '96 Miata Class: PDX/TT-6 The way out is through	I don't think the Invidia mixes and matches with other bits, does it? Either way, if you guys want to pool your money and split it up, I have no problem with that. Just work it out and let me know who's getting what. But I don't need a trade, I've already got a full TBE ready to go on the car. __________________ Is you is, or is you ain't, my con-stit-u-ints?

2010-12-29, 04:01 PM	#12
WRX06TR EJ251 Real Name: Nick P Join Date: Dec 2006 Location: Reno Posts: 881 Car: 2005 STi Class: MadtyteTunerBro! Back to the studio!	I believe the Invidia will mix, but I'm not 100%. I didn't want to buy an exhaust, just a trade for a little change. Thanks tho.

2011-01-09, 02:25 PM	#14
sperry The Doink Real Name: Scott Join Date: Nov 2002 Location: Portland, OR Posts: 20,335 Car: '09 OBXT, '02 WRX, '96 Miata Class: PDX/TT-6 The way out is through	Bump! Swirl can and fuel pump added. __________________ Is you is, or is you ain't, my con-stit-u-ints?

2011-01-10, 12:43 PM	#15
IheartSTI EJ22 Join Date: Jun 2004 Location: Reno soon.... Posts: 473 Car: 05 sti and 08 honda fit have fun	Scott please call me about the surge tank and pump. 775 200 5561 -sam __________________ live one day at a time

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Local SVX for sale	sperry	User Classifieds	2	2009-08-18 03:08 PM
Verizon Wireless Waived Activation Fee Sale. end Monday 8/10	zpeed	Vendor Correspondence	0	2009-08-08 10:37 AM
2004 STi For Sale	Egan	User Classifieds	4	2007-11-19 03:13 PM
Bridgestone Potenza RE050a on sale at TR	khail19	General Subaru Discussion & Club Chat	4	2006-06-06 11:43 AM
For Sale: 04 SILVER STI, $18.5k / OTHER ITEMS F/S	Jerry C	User Classifieds	23	2006-04-18 08:23 PM